Totally Wicked Rocket Bedienungsanleitung Seite 6

Using your Rocket Kit
Important note: It is possible to
assemble the Fuze tank by first
screwing the atomizer head onto
the base of the tank with glass
removed rather than the top cap.
This is not recommended, as it will
mean that the threads securing the
atomizer head to the top cap are
not fully engaged. If this incorrect
assembly procedure is used, the
atomizer head will remain attached
to the atomizer base when the top
cap is unscrewed. Should this occur,
remove the tank glass section from
6
the base of the tank and unscrew the
atomizer head. Refit the glass, then
refit the atomizer head to the top cap
assembly and reassemble the tank
as shown on page 4.