axing SAB 9901-10 Betriebsanleitung Seite 3

Safety advice:
4
Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
4
To prevent damage to your equipment and to avoid possible peripheral
damages, the devices foreseen for wall mounting may only be installed
on a flat surface.
4
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. The mains cable as well as feeder lines may not be
damaged or clamped by objects of any kind.
4
Choose the location of installation or mounting so that under no
circumstances liquids or objects can get into the equipment (e.g.
condensation, water coming from leaking roofs or flowing water, etc.).
4
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Absolutely
avoid that cables come near any source of heat (e.g. radioators, other
electrical devices, chimney, etc.).
State of the art 2016-10-12 Technical changes, design modifications,
errors and misprints are subject to change without prior notice
Technical Data:
SAB 9901-10 SAB 9901-17 SAB 9902-10 SAB 9902-17
Frequency range 5...2200 MHz
Throug loss
Terrestrial 2 dB 1,5 dB
SAT 3 dB 3,5 dB
Tap loss
Terrestrial 10 dB 17,5 dB
SAT 10 dB 17 dB
Your device is marked with the WEEE symbol (Waste Electronics
and Electrical Equipment). This means that the electrical and
electronic components must not be disposed of as residual waste.
Used electrical and electronic components must be disposed of
WEEE Nr.
separately.
DE14023300
Manufacturer EWR contact adress
AXING AG Bechler GmbH
Gewerbehaus Moskau Am Rebberg 44
8262 Ramsen 78239 Rielasingen
3 dB 3 dB SAB 9901-10 | SAB 9901-17
3 dB 3 dB
SAB 9902-10 | SAB 9902-17
11 dB 18 dB
10 dB 17 dB
premium-line
1- or 2-way taps
Operation Instructions