Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions for use
Measure-
1. the measurement procedure is
ment
identical to that for the radiator
procedure
liquid.
2. the measured value can be read
for wind-
screen
off on the measurement scale for
windscreen washer fluid [C] in °C.
washer liquid
3. After measurement, clean the
supplied pipette [8] and the
refractometer carefully.
Measurement
1. Instead of the anti-freeze
procedure for
solution, apply some battery acid
to the prism surface [2] with the
battery fluid
pipette [8].
2. read off the acid density in g/cm³
(kg/l) from the boundary line on
the measurement scale for battery
acid density [A] „- / +".
3. the scale [A] is divided into three
areas to determine the charge
state.
reCHArGe = replace / recharge
FAIr =
GOOD =
remove the liquid from the prism
surface [2] and prism cover [1] with
an absorbent cloth.
then clean the prism and prism
cover carefully using a cloth
moistened with water and dry both
parts with a soft, dry cloth.
(<1.20 g/cm³);
Charge state ~50%
Acceptable
(1.20 to 1.25 g/cm³);
Charge state ~75%
Good (>1.25 g/cm³);
Charge state ~100%
Attention!
After each measurement,
Instructions for use
Clean the refractometer with a soft
cloth moistened with water. Do not
use any aggressive or scouring
cleaning agents. the refractometer
is maintenance free.
Do not dispose of this product at
the end of its product life in normal
household waste.
For more information, contact your
public waste disposal company.
Cleaning
and
main-
tenance
Disposal
Werbung
