IC Audio MX-AMP 60T Bedienungsanleitung Seite 45

Device Functions
- Rear side -
MIC Input 2 - 4 with DIN Connector
To get a full paging MIC functionality you can use
the M-D 01D microphones with a DIN-connector.
Therefore you use pin 1+3 for the MIC capsule and
pin 4+5 to switch on the priority for the respective
microphone input.
So these inputs will have a serial priority function
that is to say MIC2 overrides MIC3 and MIC4, MIC3
overrides MIC4. The LINE-input providing the
background music is muted anyway. Pushing the
call button on a paging MIC will activate the
SPEECH ONLY - output.
Since the AF-pins of the DIN-connectors are
paralleled with the XLR-connectors, phantom power
is here also available.
–
+
POWER INPUT:350WATTS POWER INPUT:350WATTS
POWER INPUT:350WATTS POWER INPUT:350WATTS POWER INPUT:350WATTS
DIN-INPUT
1: HOT
2: SCREEN
3: COLD
4: Priority
5: GND
CHIME
Microphone input 2 - 4 with DIN - connector
ic audio
3
5
PAGING MIC PAGING MIC
1
4
2
EN
17