Atral Secal 2 Bedienungsanleitung Seite 30

30
What should I do if the smoke alarm fails or is
damaged?
!
In case of failure or damages to the smoke alarm, the device must
be replaced as soon as possible. Please refer without delay to the
Hotline: 0800 2 00 1264 (free of charge).
Do not try to repair faulty smoke alarms. There are no exchange-
able parts (e.g. batteries). For safety reasons, keep the doors open
to rooms with functional smoke alarms until the faulty smoke
alarms are exchanged.
Failure is signalled as follows:
Signal tone
3 short, quiet signal tones
every 5 minutes
How to deactivate the failure signal tone for 3 days:
User key
Press the user key until a
short acknowledgement
tone sounds
After deactivation for 3 days has been made three times, deactivation
is then only possible for one day at a time.
radio frequency smoke alarm 2 – operating instructions
Red LED
Flashes once every 5 seconds
Signal tone
Short acknowledge-
ment tone
Red LED
Flashes once
every
5 seconds