Atral Secal 2 Bedienungsanleitung Seite 28

28
5
Place the device on the assembly plate with a slight anti-clockwise
turn and then turn it clockwise without using too much force until
it engages.
After reassembly, the device returns automatically to normal operation
mode. – Check the functionality of the smoke alarm by pressing the
user key until you can hear the test alarm signal.
!
The smoke alarm may be dismantled for a maximum of 2 weeks.
After completion of renovation work, ensure as soon as possible
that the RWM functions again.
In case of longer-term disassembly, maintenance assignment is
necessary and may be subject to costs.
What should I do if the smoke alarm's
environmental monitoring is activated?
!
If the surrounding monitoring activates the smoke alarm, the cause
must be rectified as fast as possible.
For example, all sorts of objects in the vicinity of the smoke alarm
(e.g. lamps, openly installed cables, room dividers, very high cup-
boards/shelves) can cause malfunctions. – The minimum distance
to objects must be 60 cm – measured from the outer edge of the
RWM. In very constricted rooms, e.g. in hallways, a lower mini-
mum distance can have been set in the RWM during installation.
Further causes of malfunctions include painting over, masking or
covering the smoke alarm.
radio frequency smoke alarm 2 – operating instructions