Aux Mode; Bt, Aux, Alarms And Sleep Timer - Numan Audio Mini Two Benutzerhandbuch

AUX MODE, ALARMS AND SLEEP TIMER

AUX MODE

Aux in mode plays audio from an external source such as an MP3 player. To play audio with Aux in mode:
BT MODE
Prior to pairing, verify your device supports BT 4.0+EDR A2DP and your device is not connected to any other BT
product. Devices may pair differently. Below is a general guide.
1. Press to source to BT mode. This will power on the BT. Turn the volume up about ¼ to start. Also turn up the
volume on the source device (the device you are streaming from).
2. Turn on the BT on your enabled device.
3. Select BT device name "NUMAN Mini Two" when it appears on your device's screen to Initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again.
• Connect the external audio source to the AuxIn 3.5 mm stereo socket.
• Either press Mode until the display shows AUX in or select
MENU > Main menu > AUX in.
• Adjust the volume of the radio (and, if necessary, the audio source device) as
required.
70