Setting Time And Date; Use And Operation - Numan Audio Mini Two Benutzerhandbuch

GETTING STARTED AND SETUP
The radio is easy to use. To play DAB or FM radio, all you need is a power source (a 100-240 V mains supply);
For Music Player mode, you need a wired/wireless Ethernet network and a UPnP music server (e.g. a PC). For
Internet-connected modes such as Internet radio, you also need a broadband Internet connection.
When the radio is started for the first time, it runs through a setup wizard to configure
settings for date/time and network. Once this has finished, the system is ready to use
in most modes. Note: To change these settings later, select
To run the setup wizard again, select
Yes to start the setup wizard. If you choose No, the next screen asks if you would like to
run the wizard next time the radio is started. The system then starts without configuring
time/date and network settings and enters the Main Menu.
NOTE: If power is removed while the wizard is in progress, the wizard will run again next
time the radio is started.

SETTING TIME AND DATE

To change between 12 and 24 hour display, select

USE AND OPERATION

Set 12/24
49
MENU > System settings
MENU > System settings > Setup
hour and then select your preference.
>.
wizard. Select