Scanning For Stations; Selecting Stations; Dab Radio Mode - Numan Audio Mini Two Benutzerhandbuch

DAB radio mode receives DAB/DAB+ digital radio and displays information about the
station, stream and track playing. To enter DAB mode, either press Mode until the display
shows DAB Radio or select:

SCANNING FOR STATIONS

The first time you select DAB radio mode, or if the station list is empty, the radio automatically performs a full
scan to see what stations are available.
You may also need to start a scan manually to update the list of stations for one of the
following reasons: Available stations change from time to time. If reception was not good
for the original scan (for example the antenna was not up), this may result in an empty or
incomplete list of available stations. If you have poor reception of some stations (burbling),
you may wish to list only stations with good signal strength. To start a scan manually, se-
lect:
To remove stations that are listed but unavailable, select:

SELECTING STATIONS

To listen to a station or to change it, press the
Once selected, the station plays and the screen shows information about the station, track or show as broadcast.

DAB RADIO MODE

MENU > Main menu >
MENU > Scan. Once the scan is complete, the radio shows a list of available stations.
MENU/BACK
DAB.
MENU > Prune invalid > YES.
key, then press SELECT
65
(knob) to select a station.