Koenic KWM 71412 A3 Gebrauchsanweisung Seite 21

Size - A5
Start washing
1. Turn on the washing machine with the On/
Off switch.
2. Use the program selector to select a
suitable program and, if necessary, a
suitable additional function. Please refer to
the following Program table.
3. Use the Temp. button to change the
temperature if the preset temperature does
not meet your requirements. The higher the
temperature the more energy is consumed.
4. If necessary use the Speed button to
select a different spin speed if the preset
speed does not meet your requirements.
The higher the spin speed, the drier but also
more creased the laundry is. High speeds
also reduce the life of the washing machine.
Note:
Only use low spin speeds for delicate
garments.
5. By pressing the Function button, select
one of the additional functions, Pre Wash
or Extra Rinse, if necessary.
6. Start the washing process by pressing the
Start/Pause button.
7. Press the timer button Delay to set a later
time for the machine to start. By pressing
the button several times a start time of 1 to
24 hours can be set in 1-hour increments.
To do so, follow the steps 1 to 5, then use
the Delay button to set the start time,
wait until the display shows the wash time
and then press the Start/Pause button. If
the preset time has elapsed, the washing
machine will automatically turn on and the
washing time will be shown on the display.
KWM 71412 KWM 81412_170921_V05_HR.indb 21
8. You can also create your own program and
save it under program point My Cycle.
Turn the program selector to your desired
program. Set the required temperature, spin
speed and special functions. Then press the
Speed button for 3 seconds to save the
settings. The program remains stored and
can be changed at any time as described
above.
Caution
The door may only be opened if the
appliance is not running, e.g. after washing
program is finished. Do not try to open the
door while the appliance is running.
English
21
21/9/17 1:40 pm