Installation And Setup Instructions; Controls And Connectors - UNIelectronic URD 1002 Bedienungsanleitung

Installation and Setup Instructions

To ensure reliable and safe operation of the unit, you should carefully read this instruction- and setup-manual.
To prevent overheating, make sure that the cabinet and/or the rack is sufficiently ventilated and that there are no
other heat sources in the immediate vicinity.
For trouble-free operation an ambient temperature of 30°C must not be exceeded.
Please do not expose unit to direct sunlight or place it near a heater. Avoid exposure to splashing water, high hu-
midity and excessive dust and vibration.
Should a foreign object or fluid get inside the unit, disconnect from electricity immediately and have unit checked
by an authorized dealer.
Do not open unit yourself, as otherwise warranty will be void.
Before switching on the amplifier, ensure that the master control as well as all input controls are turned to their
lowest setting (turn counterclockwise). Incorrect positioning of these level controls can lead to a sudden surge of
sound that may damage speakers and/or amplifier.

1. Controls and Connectors

1.1 Front View
1 SD Card Slot
2 USB Connector
3 LCD for CD/MP3 Player
4 CD Slot/CD Eject
5 Source Selector
6 Mute Button
7 Prog Button
1.2 Rear View
21 Ethernet (optional)
22 RS232 (optional)
23 Control Inputs (optional)
8 Repeat Button
9 Play 1 Button
10 Previous/Next Folder
11 Stop Button
12 Play/Pause-Button
13 Previous/Next Track
14 Pitch Control
24 FM Antenna Connector
25 Mono/Stereo Selector
26 Tuner Output
15 Remote Control Indicator
16 Tuner LCD
17 Scan
18 Store Key
19 Store Key
20 Mains Switch
27 CD/Tuner Priority Output
28 CD Output
29 Mains Connector