5.2.4 Konfiguration der Alarm‐Eingänge
Schritte:
1. Rufen Sie die Seite Alarm Eingang Einstellungen auf:
Konfiguration > Erweiterte Konfiguration> Basis Event > Alarm Eingang:
2. Wählen Sie die Alarm‐Eingangs‐Nr. und den Alarm‐Typ aus. Der Alarmtyp kann NO (Normally Open)
und NC (Normally Closed) sein.
3. Tragen Sie den Namen ein
um einen Namen für den Alarmeingang zu setzen (optional).
4. Klicken Sie
arming schedule configuration is the same as the setting of the arming schedule
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
5. Click
including Notify surveillance center, send email, trigger channel, smart
tracking and trigger alarm output are selectable. Please Step 3 in Section 5.2.1
Configuring Motion Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox
and select the No. to enable Preset Calling, Patrol Calling or Pattern Calling.
7. You can copy your settings to other alarm inputs.
8. Klicken Sie
Abbildung 5‐19 Alarm Input Einstellungen
tab to enter the arming schedule setting interface. The
tab to select the linkage method taken for the video loss alarm,
um Ihre Einstellungen zu speichern.
Handbuch CC‐78xx, CC‐764x, CC‐763x
54