Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick reference
31.4008.02 WeatherHub weather station
Download App
Download the WeatherHub app from the „Apple App Store" or „Google Play Store".
Connect the Gateway
Connect the gateway to the power supply using the enclosed AC power adaptor. Connect the included LAN cable to
the gateway and your router. After about 10 seconds, the gateway is in operation. The LED will turn static green. If
no DHCP server is available in your network, you can configure the gateway in the app under „Settings" manually. If
the gateway's green LED is not permanently lit, please check whether the gateway is properly connected to the AC
power adaptor and the router, or if it is turned on and connected to the Internet. (More information can be found on
the app under „Info").
Important: The gateway should always be put into operation before starting the sensors!
Set up transmitter and COSY RADAR
Set up the transmitter and the COSY RADAR as described in the specific device's manual and look for a suitable
location. Important: To get accurate ventilation recommendations, you must place the thermo-hygro transmitter
outdoors and the COSY RADAR indoors.
Add sensor
Open the app, the dashboard is displayed. The sample sensors are for testing purposes only and may be deleted
later on. Tap „Add" new sensor and scan the sensor's QR code. Then set a name for the sensor. To set a name,
select the transmitter and then tap the area left of the pencil icon on the top right corner of the screen. Repeat this
process with the COSY RADAR.
Configuration of the COSY RADAR
It is possible to get specific ventilation recommendations displayed in addition to the standard readings by using
the thermo-hygro sensor (30.3303.02) and the COSY RADAR (30.5043.01) simultaneously.
To do this you must connect the two devices:
Select „Configure" in the
setting options.
1
Read measurements
Now you can read the measured values and overviews on your mobile phone and get specific ventilation
recommendations.
Troubleshooting
If no sensor readings are displayed on the app, check first whether the gateway's green LED is permanently lit.
(See „Connect the gateway").
If the gateway works properly, but the problem persists, we recommend the following steps:
•
Check if the sensor batteries are inserted with the correct polarity.
•
Restart the sensor by removing the batteries for a minute and reinserting them.
•
Check if your phone is connected to the internet.
•
Decrease the distance between sensor and gateway. The signal may be weakened by thick
walls and ceilings.
•
More information can be found on the app under „Info".
Specifications
Power supply (gateway):
Input power adapter:
Output power adapter:
Network connection:
Transmission frequency:
Maximum radio-frequency power:
Further specification can be found in the thermo-hygro transmitter manual (30.3303.02) and the COSY RADAR
manual (30.5043.01).
Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
Do not dispose of batteries or rechargeable batteries in the household waste!
As a consumer, you are legally required to take them to your retail store or to appropriate
collection sites according to national or local regulations in order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic Equipment Direc-
tive (WEEE). Please do not dispose of this product with other household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of
electrical and electronic equipment, in order to ensure environmentally-compatible disposal.
EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 31.4008.02 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.tfa-dostmann.de, E-Mail: info@tfa-dostmann.de
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Germany
No part of this manual may be reproduced without written consent of TFA Dostmann.
2
The technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about your product can be found by entering
your product number on our homepage.
Press and select a
compatible sensor.
More information and detailed instructions can be found in the app at "Info" or on
www.tfa-dostmann.de/weatherhub.
AC power adapter
230 V~/ 50 Hz (35 mA)
20 V~ (100 mA)
LAN (RJ45)
868 MHz
< 25mW
Werbung
