Herunterladen Inhalt Inhalt Diese Seite drucken

Special Safety Regulations; Safety Devices - Electric House 69520 Gebrauchsanweisung

Fan heater
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

INSTRUCTION MANUAL
Introduction
To get the most out of your new fan heater, please
read through these instructions and the attached
safety regulations before use. Please also save the
instructions in a safe place in case you need to
remind yourself of the heater's functions at a later
date.
The fan heater buttons
1. Thermostat dial
2. Function selector
3. Indicator

Special safety regulations

The fan heater is not suitable for use outdoors,
in bathrooms or in other wet or damp
environments.
Please note that the fan heater can become
very hot and should, therefore, be placed at a
safe distance from flammable objects such as
furniture, curtains and similar.
Do not cover the fan heater.
Do not place the fan heater immediately under
a wall socket.
ENGLISH
Do not connect the fan heater using an on/off
timer or other equipment which can
automatically switch on the device.
The heater must not be placed in rooms where
flammable liquids or gases are used or stored.
If an extension cord is used, it must be as
short as possible and always be fully extended.
You must not connect other equipment to the
same main plug as the fan heater.
Use
Position the fan heater so that it stands
upright on a firm surface and at a safe distance
from wet environments and flammable objects.
Connect the fan heater to the mains.
Set the thermostat button to the maximum
temperature.
The fan heater comes on when the function
selector is set to circulation without heat,
1,000 W fan heating or 2,000 W fan heating.
The indicator comes on when the fan heater is
running.
Once the room reaches the required
temperature, you should turn the thermostat
button clockwise until the fan heater switches
off with a little click. The fan heater now starts
and stops automatically and thus keeps the
room temperature constant.
The fan heater is switched off by setting the
function selector to "Off".
Note! The fan speed is constant and independent
of the thermostat setting.
During the first few minutes of operation, the fan
heater may give off a slight smell. This is normal
and will soon pass.

Safety devices

The fan heater has a built-in thermal safety device
which automatically switches the fan off if it
overheats. The fan can only be switched back on
once it has cooled.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis