Screen Control Screen; Adjusting The Picture Quality; Setup Menu Screen; Select The Setup Menu Screen - Kenwood LZ-7500 Bedienungsanleitung

Operation

Screen Control Screen

S C R E E N
T I N
C O L
C O N T
B L K
D I M
Dimmer sensor
SCREEN

Setup Menu Screen

S Y S T E M
S E T U P
SCREEN
4 - English
O K
T O U C H
RTN

Adjusting the Picture Quality

1
Displaying the Screen Control Screen
Press the [SCREEN] button.
2
Setting
Touch the [2] or [3] button.
Item Touch Setting
[ 3 ]
TIN Stronger green level
[ 2 ]
Stronger red level
[ 3 ]
COL Deeper colour
[ 2 ]
Paler colour
CONT [ 3 ]
Stronger contrast
[ 2 ]
Less contrast
[ 3 ]
BLK Less black level
[ 2 ]
Stronger black level
[ 3 ]
DIM Brighter screen
[ 2 ]
Darker screen
• The [ TIN ] and [ COL ] cannot be adjusted for the RGB-
navigation picture or the setup screen.
• The [ TIN ] cannot be adjusted for the picture of PAL.
• Separate picture quality settings can be stored for the video
and navigation screens.
As regards [DIM] (Dimmer) adjustment:
There is no connection with the vehicle's
illumination switch. (A dimmer sensor is installed
facing the front of monitor unit for light detection).
3
Exit the Screen Control Screen
Touch the [OK] button.
If you make no operation for 10 seconds, the screen
control screen is automatically canceled.

Select the Setup Menu Screen

Press the [SCREEN] button for at least 1 second.
Setup Menu Screen is displayed.

Select the System Setup Screen

Touch the [SYSTEM] button.
System Setup Screen is displayed.(Page 5)

Select the Touch Panel Adjustment Screen

Touch the [TOUCH] button.
Touch Panel Adjust Screen is displayed.(Page 6)

Exit the Setup Menu Screen

Touch the [RTN] button.
If you cannot selected a setup menu item. Press the
[SCREEN] button for at least 2 second, the touch panel
position settings are reset to the factory defaults.