Whirlpool AWZ9CD/PRO Sicherheitshinweise, Gebrauchs- Und Installationsanleitung Seite 129

WATER DROPLETS ARE
BENEATH THE DRYER
Bottom filter not inserted
correctly
Lint remaining on bottom filter or
door seal
Water tank not inserted correctly
Direct drain connection not
working properly
Dryer not standing level
• Check position of the bottom
filter and make sure it is
completely integrated in the
filter compartment .
• Remove lint residues on the
rubber seals of bottom filter and
door seal .
• Push in the water tank and
make sure that it is completely
integrated in the tank
compartment .
• Check drain connection and
make sure that the water can
drain .
• Check level position of dryer
on the tabletop with a water
level; if needed adjust the dryer
feet .
(refer to INSTALLATION GUIDE) .
EN
129