Technical Data; Warranty - IKA T 10 basic ULTRA-TURRAX Betriebsanleitung

Technical data

Speed range
Speed display
Speed variation on load change %
Perm. ambient temperature
Perm. relative humidity
Perm. on time (drive unit)
Overload protection/blocking
protected
Protection to DIN EN 60529
Power consumption
Power output
Voltage
or
Frequency
Noise (without dispersing element) dB (A) 65
Drive dimension (W x D x H)
Clamp arm dimension (Ø x L)
Weight
Contamination level
Protection class
Overvoltage categorie
Operation at a terrestrial altitude m
Subject to technical changes!
T 10 basic_092012
rpm 8.000 - 30.000
(at nominal designed voltage and
50 Hz)
Scale (see speed table)
< 6
°C 5 – 40
% 80
min max. 10 ON/min. 5 OFF
locking bimetallic switch;
temperature and power sensitively
IP 30
W 125
W 75
VAC 220 – 240
(nominal design voltage 230V)
100 – 120
(nominal design voltage 115V)
Hz 50/60
mm 56 x 66 x 178
mm 8 x 100
kg 0,5
2
II
II
max. 2000 above sea level

Warranty

In accordance with IKA warranty conditions, the warranty period
®
is 24 months. For claims under the warranty please contact your
local dealer. You may also send the machine direct to our works,
enclosing the delivery invoice and giving reasons for the claim. You
will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to
faults resulting from improper use or insufficient care and mainte-
nance contrary to the instructions in this operating manual.
19