Help And Specifications; Secondary And Inactive Stations; Hints And Tips; Software Updates - PURE EVOKE-2S Bedienungsanleitung

Help and Specifications

Secondary and inactive stations

(<</>>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows '>>' next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a '<<' before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations appear on the station list preceded by '?' and cannot be tuned
to. A station may be inactive or unavailable because the station is not broadcasting at the current
time (check with the station), you are out of range, or it has stopped broadcasting altogether.

Hints and tips

Display says 'No stations available' or ' Station not available'
Use Autotune (> page 11) to search for stations. Try adjusting your aerial or radio position.
Receiving new DAB stations that have started broadcasting
Use Autotune (> page 11) to scan for new stations and add them to the station list.
Using the alarm when a ChargePAK E1 is fitted
When the radio is powered by a ChargePAK E1 for portable listening, i.e., a ChargePAK
rechargeable battery is fi tted and the unit is not connected to mains power, the radio switches off
completely when the Standby button is pressed and the alarm will not sound. In this case, the
message 'Disabling alarm' will be displayed when the Standby button is pressed.
Resetting your radio
Resetting your radio removes all presets, clears the station list and resets all options to defaults.
1. Press and hold the Menu button for four seconds.
2. Turn and push the Tune dial to select 'Factory Reset'.
3. Push the Tune dial within 8 seconds to confi rm the reset or the reset will cancel.

Software Updates

Software updates for your EVOKE-2S may be made available in the future. If you register your
product and include a valid e-mail address you will receive notifi cation of software updates
(register at www.pure.com/register or fi ll in the supplied warranty card). Alternatively, visit
www.pure.com/support at any time to check for available software updates.
To update your software
Connect your radio to your PC using a suitable A-to-mini-B type USB cable. Follow the instructions
provided with the software download at www.pure.com/support.
Note: USB update requires a PC (not Mac) with internet access running Windows XP and a
suitable USB cable (not included).
Help and Specifi cations
EN EN
13