Olsberg OEC II Anleitung Seite 21

● Loosen screws on right side panel.
● Remove right side panel.
● The further of the installation is performed as de-
scribed
PowerSystem II Compact", step 1-4.
● Push the heating gas temperature sensor into the
sensor pocket on the right side of the stove and
screw tight with the sensor sleeve and the union nut.
1.
● The further of the installation is performed as de-
scribed
PowerSystem II Compact", step 6-14.
2.
in chapter "Installation
Heating gas temperature sensor
Sensor sleeve Union nut
in chapter "Installation
steps Tolima
steps Tolima
21