SOLIS 703.01 Bedienungsanleitung Seite 40

• NOTE: Humidification will be even more effective if the filled water is not very
cold. However, the water temperature should not exceed 30°C, otherwise the
humidification plates and other appliance parts might be damaged. To prevent
fast calcification, you can use filtered water if the water is very calciferous. How-
ever, slight limescale on the humidification plates improve the humidification
power, as the microstructure of the limescale causes even more water to stick
to the plates.
• Check if the axle with the humidification plates is correctly placed in the socket
in the water basin. The gear wheel of the humidification plates should be near
the rear end of the basin. NOTE: The humidification plates will only properly fit
into the socket when the gear wheel is placed in the rear end of the basin.
• Place the top back on the water basin. The small gear wheel on the appliance
top (next to the filter) should be in position directly above the big gear wheel of
the humidification plates.
• Plug the connection adapter into the appliance jack on the appliance back side
and the power plug into the power outlet. The power supply symbol (1)
minates.
78
▲
•
P O W E R B U T T O N F O R S W I T C H I N G T H E A P P L I A N C E
O N A N D O F F ( 1 6 )
•
•
S P E E D B U T T O N F O R P R O G R A M S E L E C T I O N
R E S P. F O R S E T T I N G H U M I D I F I C AT I O N P O W E R ( 9 )
gear wheel
•
illu-
THE FUNCTION BUTTONS
The function buttons are touch sensitive sensor buttons. Briefly touching the
function buttons will switch on the corresponding functions and illuminate the
respective function displays. Every touch is accompanied by a signal sound.
Touching the "power" button switches the appliance on with the "CURRENT
HUMIDITY" (4) display lighting up and displaying the corresponding value
immediately.
Touching the "power" button a second time switches the appliance off.
With the speed button, you can choose from 4 programs:
AUTO: In automatic mode, the humidification power will be automatically
adjusted to the current room humidity, meaning:
If the current room humidity is less than 40% (the "CURRENT HUMIDITY" dis-
play (4) will state "LOW"), the appliance works at high speed.
If the current room humidity is between 40% and 60% (the "CURRENT HUMID-
ITY" display (4) will state "LOW" and "MID"), the appliance works at interme-
diate speed.
If the current room humidity is above 60% (the "CURRENT HUMIDITY" display
(4) will state "LOW","MID" and "HIGH"), the appliance works at lowest speed.
In the control panel, "AUTO" as well as the 6 bars indicating humidification
power light up in an ascending order.
LOW: In "LOW" mode, the lowest humidification power is set. The display
"LOW" (10) and the first two bars light up in the control panel.
MID: In "MID" mode, intermediate humidification power is set. The display
"MID" (10) and the first four bars light up in the control panel.
HIGH: In "HIGH" mode, the highest humidification power is set. The display
"HIGH" (10) and all six bars light up in the control panel.
79