Hama 00042580 Kurzanleitung Seite 10

Connection Specifications:
Terminal Specification
SAT scart input only
AUX IN scart input only
AUX IN cinch input only
AUX IN cinch input only (front)
DTT scart input only
DVD scart input and output
VCR scart input and output
TV 1 scart output only
TV 1 cinch output only
TV 2 cinch output only
HIFI cinch output only
Always check maximum signal capacity for each terminal to ensure optimum signal transfer
from appliances. HAMA also stocks a wide range of leads and adapters for appliances using
other types of connector.
Notes:
TV 1 TV1 cinch connections are connected parallel to TV 1 Euroscart terminal. Only
composite appliances can be connected at this output terminal. TV 1 cinch output
terminal will only function if it receives a composite signal from input terminals.
TV 2 Output signal at TV 2 cinch terminal and DVD Euroscart is the same.
Output signal can be selected using TV 2 button on front panel.
When TV 2 is not pressed, output signal comes from VCR scart terminal.
When TV 2 is pressed, output signal comes from TV 1 scart terminal.
HIFI Audio output terminals for connection of hi-fi unit.
Audio signal comes from TV 1 Euroscart terminal output.
AUX AUX Euroscart terminal, AUX cinch connections at front and back are connected
parallel to each other: only one terminal should be used at any one time. As soon
as front AUX cinch terminals are connected, AUX terminals at rear are automati-
cally switched off. AUX cinch input terminals only accept composite signals.
Signal
composite, S-video, RGB, audio
composite, S-video, RGB, audio
composite, audio
composite, audio
composite, S-video, RGB, audio
input: composite, S-video, RGB, audio
output: composite, audio
input: composite, audio
output: composite, S- video, RGB, audio
composite, S-video, RGB, audio
composite, audio
composite, audio
audio
9