Attaching The Clipper Blade; Function Checks For Clipper Fav5 - Aesculap Suhl FAV5 Gebrauchsanweisung

4.1.2 Attaching the clipper blade

Risk of injury caused by sharp cut-
ting plates!
Handle the clipper blade of
WARNING Clipper FAV5 with appropriate
caution.
Note
The clipper blade GT330 #10 (USA+UK) for Clipper FAV5
is included in the scope of delivery. Various clipper
blades are available for different applications!
1
Fig. 1
If the hinge is closed: Open hinge 1 with a
screwdriver, see Fig. 1.
12
Fig. 2
1
Install clipper blade 12 on open hinge 1, see Fig. 2.
Press ON/OFF switch 3.
Fig. 3
Slightly push clipper blade 12 towards Clipper
FAV5, see Fig. 3.
Clipper blade 12 will click into position.
Check that clipper blade 12 is correctly seated on
Clipper FAV5.

4.2 Function checks for Clipper FAV5

Carry out a visual inspection.
Check the switch position.
Install the cutting set correctly and lubricate it if
necessary, see Chapter Treatment of the cutting
set.
Clean the Clipper FAV5 prior to use, see Chapter
Cleaning/Disinfecting.
12
5