Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Operation
Note
• The functions described in this
section are only available for
Bluetooth-capable terminal devices.
• Note that the max. range of
Bluetooth without any obstacles
such as walls, people, etc. is
10 metres.
6.1. Bluetooth connection
Note - Pairing
• Make sure that your Bluetooth-
capable terminal device is on and
Bluetooth is activated.
• Make sure that your Bluetooth-
capable terminal device is visible for
other Bluetooth devices.
• For more information, please refer
to the operating instructions of your
terminal device.
• Press ON/OFF for about 2 seconds.
• The status LED initially illuminates blue,
then switches off for several seconds
before flashing blue.
4
• This means the Bluetooth remote release is
searching for a Bluetooth connection.
• Open the Bluetooth settings on your
terminal device and wait until hama
selfie appears in the list of Bluetooth
devices found.
• Select hama selfie and wait until hama
selfie is listed as connected in the
Bluetooth settings on your terminal device.
The status LED (2) switches off.
Note - automatic connection
and possible problems
After the devices have been paired
once, the connection is then
established automatically. If the
Bluetooth connection is not established
automatically, check the following:
• Check the Bluetooth settings of
your terminal device to see whether
hama selfie is connected. If it
is not, repeat the steps described
above.
• Check whether obstacles are
impairing the range. If so, move the
devices closer together.
Werbung
