Inserting Or Replacing Batteries; Operation - Ideen Welt YS-8052 Bedienungsanleitung

INSERTING OR REPLACING BATTERIES

1. Open the battery compartment by
removing the cover and remove any
old batteries if any.
2. Insert two 1,5 V LR06/AA batteries.
Make sure that the polarity (+/-)
is correct in accordance with the
printings (Fig. 1).
3. Close the battery compartment by
attaching the cover.

OPERATION

The high voltage grid consists of 3 layers.
The both outer layers and the inner layer are
charged with different polarity. If the insect
touches the inner and an outer layer it will be
killed by electric shock.
• For killing insects switch on the product by
setting safety-switch to ON position.
• Hold the handle, push the high voltage button and try to catch
the insect with the grid.
Note: If the high voltage button is pushed and the grid is live
then the green indicator LED turns on.
• If the insect touches the inner and outer layers it will be killed by
an electric shock.
Note: Be carefully not to touch any person, animals or objects
with the fly swatter. It is enough to touch an insect with the high
voltage grid. There is no need to move the fly swatter at high
speed in order to hit the insect.
• After using turn off the product by setting the safety switch to
OFF position.
YS-8052_100x135mm_170116.indb 13
13
Fig. 1
Fig. 2
16/1/2017 2:54 PM