Cleaning And Maintenance; Technical Specifications - Omnitronic LH-086 Bedienungsanleitung

Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Insert the battery and make sure that the poles are correct.
Replace the battery cover and close it.
If the device will not be used for a longer period of time, remove the battery in order to avoid battery leakage.
In order to have a long battery life, you should only use alcaline batteries.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.
The LH-086 cable-tester is suitable for most Showtechnic-applications. You can test jack, RCA, DIN, XLR
and Speaker cables via the respective inputs and outputs. Additionally, you can use the continuity tester via
two banana sockets for connecting the measuring pins via LED and beeper for indicating continuity.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the battery. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging battery".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 22.10.2008 ©
Danger of explosion when battery is replaced improperly.
BATTERY DISPOSAL NOTICE
Please dispose of old and used batteries properly.
1 standard 9 V battery
190 x 112 x 60 mm
0.8 kg
Caution!
10/10 00040862.DOC, Version 1.0