Individual Group Regulation - Lichtgate plus LGC-ES03 Bedienungsanleitung

C. Individual group regulation
The entire lighting installation is subdivided into two groups, for instance close to and far away from a window.
Two light sensors are installed. Each group is regulated and switched individually by means of an associated
light sensor in relation to daylight. Both light sensors are connected parallel to the
When the presence detection feature is activated, it functions parallel, i.e. only if both of the sensors do not
detect any movement, the entire lighting system is switched off.
DALI EVG
Gruppe 2
DA, Gr.1
DALI EVG
Gruppe 1
32
z.B. NYM-J 5x1,5 mm
DALI EVG DALI EVG
Gruppe 2 Gruppe 2
Sensor 2
DALI EVG DALI EVG
Sensor 1
Gruppe 1 Gruppe 1
Installation example: Broadcast mode
2
Setpoint adjustment, optional:
– at the sensor ➞ see section 4.1.1. C.
– via the wall push-button
➞ see section 4.1.2. C
L, N,
– via the remote control
PE
➞ see instructions LGR-SC
DA, Gr.2
Setting presence detector:
Operating mode / turn-off delay, at
the sensor ➞ see sensor operating
Controller
manual.
L, N,
Setting sensor functions:
PE
"Light + presence sensor 1"
"Light + presence sensor 2"at the sen-
sor ➞ see sensor operating manual.
Wall control elements
and functions ➞ see section 5.
controller.