Setting Parameters Of The Different Dvb Update Sources - Loewe MovieVision DR Bedienungsanleitung

Software update

Setting parameters of the different DVB update sources

Channel
Frequency
Bandwidth
Symbol rate
QAM
modulation
Band
Software update wizard
The software update can be made via a USB stick or DVB antenna. If you do
not make any changes, your TV makes it with the following settings:
Update source
Frequency
Symbol rate
Band
TV menu
Settings
Miscellaneous
Software update
Start update
If you want to change the update settings:
 Select Change update settings,
OK the wizard polls the update settings.
➠ The selection options depend on the antenna
cables connected at the initial installation.
USB only
New software is searched for via USB.
USB and DVB-T
New software is searched for first via USB then via
DVB-T (digital terrestrial transmission).
USB and DVB-C
New software is searched for first via USB then via
DVB-C (digital cable transmission).
USB and satellite
New software is searched for first via USB then via
DVB-S (digital satellite transmission). The name of
the currently selected satellite is displayed.
Select the channel on which the new software is
provided.
Enter the frequency of the station to be transmitted
directly.
Is preset automatically depending on the selected
channel.
Enter the symbol rate of the station to be transmit-
ted directly.
Set the suitable type of modulation.
Set the transmission range for satellite reception.
USB and satellite: ASTRA1 19,2°E (DVB-S)
(ASTRA1 19,2°E)
12603 MHz
22000
horiz/high
Change update settings
OK
END
37 -