Basic Information; Explanation Of The Buttons; Preparations For Your Movievision Dr; Safety Notes - Loewe MovieVision DR Bedienungsanleitung

Basic information

Explanation of the buttons

Preparations for your MovieVision DR +

Insert the small plug of the supplied USB cable into the socket of
your Loewe MovieVision DR + . Connect the larger end to a USB
connection of your Loewe TV set (see TV operating instructions).
➠ It could happen that MovieVision DR + will not start due to low
energy supply (for example, if using a USB extension cord). If
this should happen, we recommend using a powerful, active
USB hub, i.e. Kensington Pocket Hub 2.0 4 Port (available at your
local dealer).

Safety notes

Your MovieVision DR + can usually withstand falls from a height of
up to 1.30m. Nevertheless, protect the MovieVision DR + well against
falls. These could damage it irreparably.
Do not disconnect MovieVision DR + from the TV set or PC when
in use. This could result in the loss of data. It is best to switch the
TV set to the standby mode when connecting or disconnecting
MovieVision DR + .

Disclaimer

Loewe cannot generally accept any liability for loss of data.
Masthead
Loewe Opta GmbH
Industriestraße 11
D-96317 Kronach
www.loewe.de
All rights including translation, technical modifications and errors
reserved.
Open DR archive and/or Video archive
Play a recording
Suspend the playback (Pause)
End the playback (Stop)
Rewind (press and hold)
Fast forward (press and hold)
Play highlights
Display detailed recording information
Show status bar
Printed in Germany
Published on 10/09-1.0 TB/FP
© Loewe Opta GmbH, Kronach
23 -