Recording; Listening Through A Receiver (Home Theatre) - Samsung UE40B6000VWXXC Bedienungsanleitung

Recording

¦
You can make a recording of a TV Programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE
button. Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTERE
button. Recording begins.
When the recording device is not displayed select Device List and press the Red
N
button to search devices
3. Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
N
Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device,
N
the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
N
antenna to a recording device, refer to the recording device's users manual.

Listening through a Receiver (Home theatre)

¦
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
3. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the optical in jack of the
N
receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
When the receiver (home theatre) is set to On, you can hear sound output from
N
the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home Theatre receiver. When the source is a digital component such as a DVD and is
connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
N
failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
English - 41
View TV
Device List
Recording : DVDR
DVDR MENU
DVDR INFO
Receiver : Off
Setup
U Move E Enter R Return
View TV
Device List
Recording : DVDR
DVDR MENU
DVDR INFO
Receiver : Off
Setup
U Move E Enter R Return