Setting Up Anynet - Samsung UE40B6000VWXXC Bedienungsanleitung

1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet + device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet + device using an HDMI
cable.
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on
N
the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
N
Home Theatre's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
N
You can connect an Anynet + device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet + functions.
N
Anynet + works when the AV device supporting Anynet + is in the Standby or On status.
N
Anynet + supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
N

Setting Up Anynet +

¦
Press the TOOLS button to display the Tools menu. You can also display Anynet + menu
T
by selecting Tools → Anynet + (HDMI-CEC).
Setup
❑
Anynet + (HDMI-CEC) → Off / On
■
To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related operations
N
are deactivated.
Auto Turn Off → No / Yes
■
Setting an Anynet + Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet + function.
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
N
TV is turned off. If an external device is still recording, it may or may not turn off.
English - 3
Media Play (USB)
Anynet + (HDMI-CEC)
Setup
Anynet + (HDMI-CEC)
: On ▶
Auto Turn Off : Yes
U Move E Enter R Return
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes ▶
U Move E Enter R Return