Pelgrim IKM614MAT Bedienungsanleitung Seite 133

USE
N3
N
Cleaning the nozzles
Clean the nozzles on the milk container every time after heating milk or
making cappuccino. Otherwise, remains of milk may set hard.
1. Place a container under the milk dispenser pipe and press on the
CLEAN button (N3) on the milk container for at least 5 seconds.
The display shows "CLEANING"!
Warning! Risk of scalding from steam and hot water escaping
from the milk dispenser pipe.
2. Remove the milk container and clean the nozzles on the appliance
with a damp cloth.
3. Put the hot water nozzle back in.
After you fi nished cleaning, remove the milk container and place it
in the fridge, as the milk should not stay out of the fridge for longer
than 15 minutes. See "Cleaning the nozzles and the milk container"
for information on cleaning the milk container.
EN 19