Installation - ZANKER ZKC 9141 Benutzerinformation

Installation

• Warning! Do not connect the appliance to the mains until the installation is fully complete.
• Mark a centre-line on the wall from the
cooktop to the ceiling.
• Using the template supplied, mark the holes, drill them and insert the dowels, partly tighten 1
screw in the top dowel.
• Bearing in mind the minimum heights over the
cooktop specified above, mark the height of
the hood on the wall with a pencil and place
the template against the wall on the mark.
÷ 10 mm
3 x Ø 8mm
1 x 5x45
59