Filling The Water Tank; Temperature Settings - Team dai 26 Gebrauchsanleitung

Fax +32 2 359 95 50


FILLING THE WATER TANK

Only use demineralised water. If you want to use the steam/dry dial fill the water tank as
follows:
1) Unplug the iron from the outlet to let it cool down and set it horizontally on a
stable level surface.
2) Turn the temperature dial to "MIN" and variable steam/dry dial to the (1) setting.
3) Using the measuring cup supplied or another adequate measuring cup and fill the
water tank through the fill opening. Make sure not to exceed the "Max" mark.
NOTE: never fill with anything but water.

TEMPERATURE SETTINGS

 You can chose the temperature setting in function with the cloth to iron.
 In order to turn the iron on, please turn the temperature knob clockwise into the required
position.
DRY PRESSING

 Put the steam/dry dial on position (1).
 Plug in the iron.
 Set temperature dial for the desired fabric. Always check the label of the garment before
choosing the temperature setting.
 Set iron on heel rest and wait until temperature indicator light goes out.
STEAM PRESSING
Kind of textile
Synthetic (e.g. acetate,
acrylic, viscose,
Polyamide, polyester, ....)
Silk
Wool
Cotton
Linen
 Fill the water tank (variable steam/dry dial on position (1)).
 Plug in the iron.
 Turn the temperature dial clockwise into the required position.
 Turn variable steam/dry dial on (1) for minimum steam or on the positions (2) or (3) for a
larger amount of steam.
 Set the iron on its heel and wait until the temperature indicator goes out.
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The page must be reproduced and folded in order to obtain a mini
booklet A5 (+/- 148.5 mm width x 210 mm height). The page must be
folded in order to keep the good numbering when you turn the page
of the I/B . Don't change the page numbering. Keep the languages
integrity.
Temperature dial
MIN









MAX
9
Assembly page 9/30
Steam ironing
(1)
(2)
(3)
TEAM DAI 26 - 060508