Intended Use; Unpacking Your Tool; Before Use; Setting Up The Battery Charger - Westfalia ABH 18 Originalbetriebsanleitung

Intended Use

Portable light-duty battery-powered rotary hammer optimally designed
for drilling masonry. Also capable of drilling wood and metal with the
optional purchase of a standard chuck with SDS Plus connector.

Unpacking Your Tool

 Carefully unpack and inspect your cordless rotary hammer.
Familiarise yourself with all its features and functions
 Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.

Before Use

Please note that that battery and charger are not included with the
tool.
Removing a Battery
 To remove the battery (11) from the tool, press the battery release
(12), then slide the battery out of the battery slot (10).
WARNING: Do not try to remove the battery without pressing the
battery release button. The tool or battery could be damaged.
Fitting a Battery
To fit a charged battery, slide it on to the battery slot (10) of the rotary
hammer until it clicks and locks into position.
Note: Make sure the battery and rotary hammer are lined up correctly.
If the battery does not slide into the tool easily, don't force it. Instead,
slide the battery out of the tool again; check the top of battery and the
rotary hammer battery slot are clean and undamaged and that the
contacts are not bent.

Setting up the Battery Charger

(Battery and Charger not included)
1. If fitted, remove any battery from the battery charger.
2. Insert the battery charger mains plug into a suitable mains socket.
Operation
30