E-FLOR Niro SPN 1100 Bedienungsanleitung Seite 17

Pumping water
Place the device in the water, making sure that it is in a vertical and safe position.
If you can not ensure a safe position, hang the device in the water by its handle (e.g. with
a rope).
Ensure that the floater switch is free to move.
Insert the plug into the mains outlet.
The pump volume is reduced the higher the water needs to be pumped. The pump
height will be reduced if both hose connections are used.
Use / Areas of application
The electric submersible pump are used in the following areas:
• Emptying of cisterns, containers of rain water, wells, ponds, swimming pools and
drains
• Draining of flooded basements, boats and yachts
• Ventilation and water circulation
Application/Liquid to be pumped out
• Clear, slightly cloudy and dirty water (depending on type of pump!!)
Attention:
Special instructions:
• Avoid larger stones getting sucked in!
• Application: To suction off dirty water with a maximum percentage of 5 % solid
material (dense material, no stone)
• Liquids/installation suitable for suction. Dirty water of all kinds, incl. with parts
containing fibre (leaves, paper, greenery etc.) Soiled liquids (from silos).
• All other liquids are fundamentally not permissible.
Not suitable for biological sewage treatment plants and cesspools.
• No flammable liquids, no gaseous or explosive substances may be pumped with
these pumps.
• The max. temperature of the liquid to be pumped may not exceed +35 °C during
continuous operation.
Attention! Avoid the pump running dry.
1220365 BDA.indd 16
16
24.11.14 16:20