Aqua Medic AC Runner 3.0 Bedienungsanleitung Seite 8

4. Maintenance / Cleaning
The pump needs to be cleaned regularly. For cleaning, do the following: First of all, remove the
bottom plate. Then, turn the pump lock (7) counter-clockwise to open the pump. Now, the complete
impeller can be removed. To remove the basket, the pump lock has to be removed from the pump
beforehand. Impeller and basket can be cleaned under running water and then be re-assembled.
When assembling, make sure that the ceramic shaft of the impeller goes into the ceramic socket of
the respective rubber bearing. Make sure the impeller rotates freely.
5. Failures
The pump is designed to have a low maintenance requirement and under normal conditions will be
very reliable, provided it is protected from contamination. If the pump gets noisy, the suction basket
and the impeller need to be cleaned or the impeller and bearings need to be replaced.
6. Warranty
Should any defect in materials or workmanship be found within 24 months of the date of purchase
AB Aqua Medic undertakes to repair, or at our option replace, the defective part free of charge –
always provided the product has been installed correctly, is used for the purpose that was intended
by us, is used in accordance with the operating instructions and is returned to us carriage paid. Proof
of Purchase is required by presentation of the original invoice or receipt indicating the dealer's name,
the model number and date of purchase. This warranty may not apply if any model or production
number has been altered, deleted or removed, unauthorised persons or organisations have executed
repairs, modifications or alterations, or damage is caused by accident, misuse or neglect. Please note
that the product is not defective under the terms of this Warranty where the product, or any of its
component parts, was not originally designed and / or manufactured for the market in which it is
used. These statements do not affect your statutory rights as a customer.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 09/2016
8