Herunterladen Inhalt Inhalt Diese Seite drucken

Product Safety - Kress Mission Nano Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für Mission Nano:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15

Product safety

General safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/
or serious injury.
Carefully read the instructions for the safe
operation of the machine.
Save all warnings and instructions for future
reference.
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
- Children should be supervised to ensure that they
do not play with the appliance.
- The appliance is only to be used with the power
supply unit provided with the appliance.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operation practices
Training
a) Read the instructions carefully. Make sure you
understand the instructions and be familiar with
the controls and the proper use of the appliance.
b) Never allow people unfamiliar with these
instructions or children to use the appliance.
Local regulations can restrict the age of the
operator.
c) The operator or user is responsible for accidents
or hazards occurring to other people or their
property.
Preparation
a) Ensure the correct installation of boundary wire as
instructed.
b) Periodically inspect the area where the appliance
is to be used and remove all stones, sticks, wires,
bones, and other foreign objects.
c) Periodically visually inspect to see that the blades,
blade bolts and cutter assembly are not worn or
damaged. Replace worn or damaged blades and
bolts in sets to preserve balance.
d) On multi-spindle appliances, take care as rotating
one blade can cause other blades to rotate.
e) WARNING! The lawnmower shall not be operated
without the guard in place.
Operation
1. General
a) Never operate the appliance with defective
guards, or without safety devices, for example
deflectors, in place.
b) Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
c) Never pick up or carry an appliance while the
motor is running.
d) Remove the disabling device from the appliance
- Before clearing a blockage;
- Before checking, cleaning or working on the
appliance.
e) It is not permitted to modify the original design of
robotic lawnmower. All modifications are made at
your own risk.
f) Start robotic lawnmower according to the
instructions. Never put your hands and feet under
the mower.
g) Do not let persons who do not know how robotic
lawnmower works and behaves use the mower.
h) Do not put anything on top of robotic lawnmower
or its charging station.
i) Do not allow robotic lawnmower to be used with a
defective blade disc or body. Neither should it be
used with defective blades, screws, nuts or cables.
j) Always switch off robotic lawnmower when you
do not intend to use the mower.
k) Keep your hands and feet away from the rotating
blades. Never place your hands or feet close to
or under the body when robotic lawnmower is in
operation.
l) To avoid using the machine and its peripherals in
bad weather conditions especially when there is a
risk of lightning.
m) Dot to touch moving hazardous parts before
these have come to a complete stop.
2. Additionally when the appliance is operating
automatically
a) Do not leave the machine to operate unattended
if you know that there are pets, children or people
in the vicinity.
Maintenance and storage
WARNING! When the machine is stopped
for servicing, inspection, or storage, or to
change the blades, remove the key from the
machine and make sure that the blades are
come to a complete stop.
a) Keep all nuts, bolts and screws tight to be sure
the appliance is in safe working condition.
b) Inspect the robotic lawnmower each week and
replace worn or damaged parts for safety.
c) Check especially that the blades and blade disc
3
EN

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis