Kress Mission Nano Benutzerhandbuch Seite 10

A. Cleaning the Body
Your MissionNANO
and longer life if it is cleaned regularly. Since your
MissionNANO is an electric machine, you will
TM
need to take care when cleaning. DO NOT use
a hose, high pressure washers or otherwise
pour running water on your MissionNANO
is best to use a spray bottle filled with water. When
cleaning the machine body, use a soft brush or
clean cloth and avoid using solvents or polishes.
Lastly, remove all build up of grass clippings and
debris.
B. Cleaning the underside
Again, it is important that you power the
MissionNANO OFF and wear protective gloves
TM
before touching the blade turning disc.
First, flip your MissionNANO
expose its underside. Here you will see the blade
disc, the chassis, and the front wheel and driving
wheels. Clean everything thoroughly with a soft
brush or moist rag.
WARNING: NEVER clean the underside of
MissionNANO
Component damage can occur.
Rotate the blade disc to ensure it rotates freely.
Check the blades spin freely around the fixing
10
screws. Remove any obstructions..
EN
IMPORTANT: Remove any lodged debris so
that it does not cause a crack in the blade
disc. Even the tiniest crack can decrease your
MissionNANO
TM
C. Clean the contact pins and the charging strips
Clean the contact pins located on the charging
base and the charging strips located on the
MissionNANO using a cloth. Remove any built
TM
up grass clippings or debris around the contact
pins and charge strips periodically to ensure the
MissionNANO successfully charges each time.
TM
3
Battery Life
The heart of the MissionNANO
charged and kept in a cool dry place between (-20
NOTE: The recommend MissionNANO
The life-span of the MissionNANO
• The length of the mowing season in your region
• Amount of hours the MissionNANO
• Battery maintenance during storage
will live a much happier
TM
upside down to
TM
with running water.
TM
's mowing output.
is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully
TM
TM
's battery depends on various factors, such as:
TM
mows per day
TM
. It
TM
C~+60 C).
o o
operation temperature is between 0-55 C.
o