Adjusting The Clock - Sunshower COMBI half body Anleitung

9. Adjusting the clock

Below you see the control panel of the Sunshower :
Adjust the clock as follows:
Hold the SELECT button for 5 seconds
•
The hour digits of the clock will flash
•
Use the + and - buttons to adjust the hours
•
Press briefly the SELECT button to select minutes
•
Use the + and - buttons to adjust the minutes
•
When you are satisfied with the adjustment, press the SELECT button.
•
The clock has been adjusted and the installation is accomplished.
Testing the Sunshower :
Press twice the START button. IR lamps should go on. Press STOP to end the
session, the Sunshower will cool down for 4 minutes.
Put the UV goggles on. After the cooling period, press SELECT to select UV mode.
Press START to start the UV session. The UV lamps and IR lamps go on. press STOP
to end the session.
The Sunshower is now ready to use.