Cleaning And Care - Ideen Welt RFC-319 Bedienungsanleitung

Size - A6
Cutting without an attachment
Warning – danger of injury! The razor head is very sharp!
Removing the comb attachment
• Remove the comb attachment.
• Without the comb attachment the hair can be cut equally to a
length of 1-2 mm.
Cutting contours on the beard/hairline the neck and side-burns.
• Position the edge of the razor head, without a comb attachment, at
the desired height of the hairline.
• Move the active hair and beard clipper down.

CLeAnIng And CARe

• Warning - Risk of electric shock! Never immerse electrical parts
of the product in water during cleaning or operation. Never hold the
product under running water.
• Warning - Property damage! When cleaning, never use solvents or
abrasive materials, hard brushes, metallic or sharp objects.
• Clean the product's exterior surfaces with a slightly damp cloth and
then dry them thoroughly.
• Remove hair from the attachments using the cleaning brush.
• You can also rinse the attachments under running water.
• Make sure the attachments are completely dry before inserting to the
clipper.
• The razor head can be removed for
cleaning. Remove the razor head (Fig. 6).
Remove hair from the razor head using the
cleaning brush. Add a few drops of razor
head oil to the razor head. After cleaning
reattach the razor head to the product
(Fig. 7). Make sure that the razor head
audibly locks into place.
• Warning – danger of injury! The razor
head is very sharp!
• Be careful when attaching and removing
the razor head.
RFC-319_A6_140124_rev.indb 22
Fig. 6
22
24/1/14 5:44 PM