Tuner Mode - Grundig M 1100 Handbuch

TUNER MODE

Selecting the tuner input source
1
Select the TUNER input source by pressing »
« on the device or »FM« on the remote
control.
– The most recently selected station is played
(Last Station Memory).
Selecting presets
1 Select a preset by pressing »
the remote control.
Note:
You can also select the preset with the number
7
»1 ... 0«.
buttons
For two-digit preset numbers, first press
»10+«. The "10s place" then stays select-
ed.
Stereo/mono reception
When the hi-fi system receives stereo channels,
» « appears in the display. If the signal from
!
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1
Press » « on the remote control to switch
b
to mono reception.
2 To switch back to FM stereo, press »
the remote control.
Displaying RDS station informa-
tion
If the device receives an RDS station, the station
name appears in the display together with »RDS«.
If no information is available, the reception fre-
quency appears in the display.
Additional information can be displayed.
1
To display information on the current RDS
station, press »INFO« repeatedly.
– The following displays appear in sequence:
The name of the radio station.
The current programme type (PTY), e.g.
»Pop music«. »[No PTY]« appears if infor-
mation is not available.
The time.
The radio text.
The frequency.
28
ENGLISH
------------------------------------------------------------------------------------------------------------------------
« or » « on
« on
b