CardioBull S15 Benutzerhandbuch Seite 49

Heart Rate
1. Use joggle wheel to set Target PULSE (preset va-
lue=100), press STRAT/STOP to workout in Target HR.
Mode. Keep both hands hold on hand grips.
2. TIME begins to count up, DISTANCE/ CALORIES/
RPM/ SPEED/ WATT/ RPM & HEART RATE will display
value accordingly.
3. The character animation only show USER, it will skip to
4. When actual PULSE value is 50% higher than Target
hing to remind user too slow.
5. Press START/STOP button to stop workout, STOP icon
is blinking, all value will remain.
6. During workout, it is invalid to press RESET /Joggle
wheel /ENTER button.
7. In STOP mode, press RESET button, monitor return to
function setting page.
next figure as per 0.1KM (or ML).
Pulse, ▲ is flashing to remind user too fast; When
actual PULSE is 50% lower than Target Pulse, ▼ is flas-
49