Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*
To avoid electric shock, do not operate these products in wet or
damp conditions. Conduct measuring works only in dry clothing
and rubber shoes, i. e. on isolating mats.
*
Comply with the warning labels and other info on the
equipments.
*
Always start with the highest measuring range when measuring
unknown values.
*
Do not subject the equipments to direct sunlight or extreme
temperatures, humidity or dampness.
*
Do not subject the equipments to shocks or strong vibrations.
*
Do not operate the equipments near strong magnetic fields
(motors, transformers etc.).
*
Keep hot soldering irons or guns away from the equipments.
*
Allow the equipments to stabilize at room temperature before
taking up measurement (important for exact measurements).
*
Do not input values over the maximum range of each
measurement to avoid damages of the meters.
*
Replace the battery as soon as the battery indicator "LO BAT"
appears. With a low battery, the meters might produce false
reading that can lead to electric shock and personal injury.
*
Fetch out the battery when the meters will not be used for long
period.
*
Periodically wipe the cabinets with a damp cloth and mid
detergent. Do not use abrasives or solvents.
*
The meters are suitable for indoor use only
*
Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.
*
Do not store the meters in a place of explosive, inflammable
substances.
*
Do not modify the equipments in any way
*
Opening the equipments and service – and repair work must
only be performed by qualified service personnel
*
Measuring instruments don't belong to children hands
- 11 -
Werbung
Inhaltsverzeichnis
