Konig Security SEC-DVR210 Anleitung Seite 3

6) MENU: press this button to enter the system setup menu, re-press to exit. All
the function of the DVR can be found here.
7) USB: to backup the video on Flash Disk. When using this function, you have
to format your USB Flash disk in "FAT" fi le system on your computer, but not
"FAT32" fi le system. Press the key shortly to save 1 fi eld image; long press this
key on keyboard or "USB-M" in remote controller to save active image. Press
again to stop saving image.
NOTE: if USB storage is removed during backup, a fatal error may occur.
8) W/M: watermark key. While the DVR is playing video, you can push this button
to see the watermark of the picture, if the video was recorded by this DVR and
has not be modifi ed, there will be a watermark symbol in each channel, press
again to clear the symbol.
9) ZOOM: push this button, the DVR will be in zoom mode. Use "Up, Down, Left,
Right" button to move the zoom area, then press "ENTER" to zoom up. Re-
push this button to exit.
10) PAUSE: to stop playing temporarily and the DVR will be in single frame mode
simultaneously. Press "REW, FWD" button to backward or forward one frame of
the picture. Push "PLAY" button to exit.
11) SCHEDULE: switch for schedule mode. If the DVR is in schedule mode, there
will be "schedule mode" symbol on top of screen. Push again to exit.
12) SEARCH: in this mode there are three methods to search the evens on HDD:
1 REC START/STOP SEARCH: search play by segment.
2 EVENT LIST SEARCH: search play by event list.
3 TIME DATE SEARCH: search play by input time.
Push "MENU" button to exit this mode.
3