Konig Security SEC-DVR210 Anleitung Seite 2

Guide for quick installation of the harddisk recorder. For details on using the harddisk
recorder, refer to advanced manual supplied on CD.
Front Panel Function Description
1. ON/OFF: Switch for DVR's power
2. REC: for video recording; and re-push to stop recording
3. PLAY: this button to start playing the video stored in Hard Disk, Re-push this button
or push stop button to stop the video playing.
4. REW: fast backward button in video playing; or single frame rewind button in single
frame mode.
5. FWD: fast forward button in video playing; or single frame forward button in single
frame mode.
6. STOP: while playing video; push this button to stop playing.
7. Function control area:
1) AUTO: push this button, the DVR will be in auto dwell state, it dwells according
to the time set in auto sequence set menu, you can set the dwell time of each
cannel. Push channel select button to exit this mode.
2) TRIP: push this button, the DVR will be in triplex mode. Both live and playback
picture can be displayed on screen simultaneously while recording. Also you
can push "search" button to choose the record events. Re-push this button to
stop this mode.
3) PIP: push this button; the DVR will be in PIP mode. Re-push this button to
change the PIP mode (one picture; two or three picture). Long push "PIP" on the
keyboard or push "PIP-C" button in remote controller, you can set PIP picture.
When one channel name is in yellow, push left and right button to change
selected channel, push up and down button to change the selected channel's
picture, then push "Enter" button to confi rm. Push channel select button to exit
this mode.
4) FREEZE: to freeze the entire picture on screen (quad, triplex), re-push to stop
this mode.
5) DISPLAY: to display the current DVR's information on the screen; include Hard
Disk, IP information etc. push again to cancel this mode.
Quick Installation Guide
2