Acer N300 Kurzanleitung Seite 5

Bluetooth GPS Receiver Set-up
CoPilot uses Global Positioning Satellites (GPS) to locate your
position on a map and to provide turn-by-turn guidance to a
destination.
It is essential that you connect the Bluetooth GPS receiver
with your PDA to obtain a GPS fix so you can enjoy satellite
navigation on your Acer n300.
Press the grey Bluetooth symbol in the bottom right corner
of the Windows Start screen and select 'Turn Bluetooth
ON' from the pop-up menu. The Bluetooth symbol will
turn blue to indicate that it is switched on.
If you have the optional GNS FM9 TMC cable, attach it
now. Otherwise, proceed to the next step.
Setting up a Holux GPS-236 Bluetooth GPS receiver
Switch on your Bluetooth GPS receiver
Launch CoPilot by selecting Windows Start > Programs and
then select the
After several seconds delay, you will be asked in a pop-up
screen to select your Bluetooth device. Select
GPSlim236'.
Acer n300 Edition
'CoPilot' icon
'Holux
CoPilot Pocket PC 6
EN
3