Menu Functions; Measure - Access To Measurement; History - Old Measurements; Sound - Setting Of Tonometer Buzzer - Icare ic100 Gebrauchsanweisung

MENU FUNCTIONS

(Figure 17)
Scrolling between the Menu functions starts from the MEASURE display, press either of the
Navigation buttons located around the Select button.
Menu functions are MEASURE, HISTORY, SOUND, LIGHT, LANGUAGE and INFO
MEASURE
LOAD
HISTORY
SOUND
ON
ON
LIGHT
ON ON
SVENSKA
LANGUAGE
ENGLISH
INFO
MEASURE – Access to measurement
Press the Select button to access.
If the probe is not loaded the LOAD display appears.
Tonometer is ready for measurement when Play-symbol
display appears.
To exit, press the Select button.
HISTORY – Old measurements
Press the Select button to access.
Scroll through the old values by pressing either of the
Navigation buttons.
Value colors green and yellow are related to Standard
deviation (SD).
To exit, press the Select button.
SOUND – Setting of Tonometer buzzer
Blue text and symbol is active setting.
Press the Select button to access.
OFF
Turn the sound ON and OFF by pressing either of the
Navigation buttons.
To accept selection, press the Select button.
LIGHT – Setting of Probe base light
Blue text and symbol is active setting.
Press the Select button to access.
OFF
Turn the light ON and OFF by pressing either of the
Navigation buttons.
To accept selection, press the Select button.
LANGUAGE – Language setting
DEUTCH
Blue text is active setting.
Press the Select button to access.
Scroll through the language options by pressing either of the
Navigation buttons.
To accept selection, press the Select button.
INFO – Device information
Press the Select button to access.
Serial number (SN) of the tonometer.
Software version (SW) of the tonometer.
To exit, press the Select button
English
5