Broncolor RFS 2.2 Bedienungsanleitung Seite 14

7. UNIT SETTINGS (c.fn)
Operation
– Switch the RFS 2.2 unit off (slide main switch to "off")
– Press and hold the "test" key and simultaneously switch on the RFS 2.2
(slide main switch to "on")
– Turn the scrolling wheel until you reach the desired function
– Mark the function with the " LP " key (set)
– Use the scrolling wheel to determine the property
– Press " LP " to confirm selection (back)
Display Function
c.fn-00 transceiver
c.fn-01 PC sync
14
Selection Description
transmitter Transmitter mode
receiver Receiver mode
output Select sync connection as output
input or input.
When unit is in receiver mode,
the PC port will be automatically
set as output.
When unit is in transmitter mode,
the PC port will be automatically
set as input