Klarstein 10029819 Einbauanleitung Seite 18

Control Panel and Functions Model 10029819
POWER: To control this appliance turn on/off. To turn OFF the appliance, press the button and
hold 5 seconds.
LIGHT: To control the inner light turn on/off.
UP: Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN: Used to lower (cool) the set temperature by 1°C/1ºF.
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
°C/°F from Fahrenheit to Celsius or from Celsius to Fahrenheit, press the UP and DOWN buttons at the
same time for 5 seconds.
• You can set the temperature as required by pressing the UP or DOWN button. When you press the two but-
tons for the first time, the LED readout will show the original temperature set previously (the temperature
preset at the factory is 12°C/54 ºF).
• The temperature will increase 1°C/1ºF if you press the UP button once or the temperature will decrease
1°C/1ºF, if you press the DOWN button once.
• To view the "set" temperature at any time, press the UP or DOWN button, the set temperature will tempora-
rily flash in the LED display for 5 seconds.
• The internal storage temperature will appear in blue color in the temperature display window.
Control Panel and Functions Model 10029820
POWER: To control this appliance turn on/off. To turn OFF the appliance, press the button and
hold 5 seconds.
SET: To set or view the internal temperature setting for each zone.
LIGHT: To control the inner light turn on/off.
UP: Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN: Used to lower (cool) the set temperature by 1°C/1ºF.
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
°C/°F
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press the LIGHT button for 5 seconds
18