Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Smartphone Application is a smart web gadget that works as a shopping navigator and provides specs comparison for IT buyers. With a simple tap of the smartphone, you'll efficiently locate your ideal products from a wide variety of choices and, if product details are required, you may easily download user manuals within minutes.
Safety Instructions ■ Always read the safety instructions carefully. ■ Keep this User’s Manual for future reference. ■ Keep this equipment away from humidity. ■ Lay this equipment on a reliable flat surface before setting it up. ■ The openings on the enclosure are for air convection hence protects the equipment from overheating.
CE Conformity Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.
Seite 6
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
Battery Information European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that... Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment”...
Seite 9
ESPAÑOL MSI como empresa comprometida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos”...
Seite 10
TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü...
Seite 13
Peripheral Connector/ 주변 커넥터/ 周辺機器のコネクター/ 週邊接頭/ 周边接口 ..........................A-12 Graphics Card/ 그래픽 카드/ グラフィックスカード/ 顯示卡/ 显卡 ....A-13 xiii Preface...
English Thank you for choosing the Z97 PC Mate/ H97 PC Mate Series (MS- 7850 v1.X) ATX motherboard. The Z97 PC Mate/ H97 PC Mate Series motherboards are based on Intel Z97/ H97 chipset for optimal system ® efficiency. Designed to fit the advanced Intel LGA1150 processor, the Z97 ®...
Seite 17
Monitor ■ CPU/System fan speed control BIOS ■ 64 Mb flash (for Z97 PC Mate) ■ 128 Mb flash (for H97 PC Mate) Features ■ UEFI AMI BIOS ■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0 ■ Multi-language Special ■...
Seite 18
Norton Internet Security Solution ■ Sound Blaster Cinema (for Z97 PC Mate) ■ Network genie ■ Small Business Advantage (for H97 PC Mate) Form ■ ATX Form Factor ■ 12 in. x 8.7 in. (30.5 cm x 22 cm) Factor For the latest information about CPU, please visit http://www.msi.com/cpu-support/...
Seite 20
Connectors Reference Guide Port Name Port Type Page Back Panel En-7 LGA1150 CPU Socket En-9 CPUFAN1~2,SYSFAN1~3 Fan Power Connectors En-19 DIMM1~4 DDR3 Memory Slots En-13 JAUD1 Front Panel Audio Connector En-22 JBAT1 Clear CMOS Jumper En-25 JCI1 Chassis Intrusion Connector En-22 JCOM1 Serial Port Connector...
Back Panel Quick Guide LAN Port VGA Port PS/2 Mouse Port Line-In USB 2.0 Port USB 3.0 Port Line-Out HDMI DVI-D Port PS/2 Keyboard Port ▶ PS/2 Mouse/ Keyboard Port PS/2 mouse/ keyboard DIN connector for a PS/2 mouse/ keyboard. ®...
Seite 22
Important This platform supports dual-display and triple-display function. HDMI+VGA HDMI+DVI VGA+DVI HDMI+VGA+DVI Extend mode ◯ ◯ ◯ ◯ (Extend the desktop to the second and third monitor) Clone mode ◯ ◯ ◯ ◯ (Monitors have the same screen) ▶ LAN Port The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).
CPU (Central Processing Unit) Introduction to the LGA 1150 CPU The surface of the LGA 1150 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. Notch Notch Golden triangle is the Pin 1 indicator...
Seite 24
CPU & Heatsink Installation When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and heatsink installation. Wrong installation can damage both the CPU and the motherboard.
Seite 25
3. Align the notches with the socket alignment keys. Lower the CPU straight down, without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is properly seated in the socket. 4. Close and slide the load plate under the retention knob. Close and engage the load lever.
Seite 26
7. Locate the CPU fan connector on the motherboard. 8. Place the heatsink on the motherboard with the fan’s cable facing towards the fan connector and the fasteners matching the holes on the motherboard. CPU fan connector 9. Push down the heatsink until the four fasteners get wedged into the holes on the motherboard.
Memory These DIMM slots are used for installing memory modules. DIMM1 DIMM2 DIMM3 DIMM4 Video Demonstration Watch the video to learn how to install memories at the address below. http://youtu.be/76yLtJaKlCQ Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data with two data bus channels simultaneously.
Mounting Screw Holes When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that came with the computer case, please replace it with the I/O backplate that came with the motherboard package.
Power Supply Video Demonstration Watch the video to learn how to install power supply connectors. http://youtu.be/gkDYyR_83I4 JPWR1~2: ATX Power Connectors These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and firmly press the cable into the connector.
Video/ Graphics Cards If available, this motherboard takes advantage of the CPU’s integrate graphics processor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Adding on one or more discrete video cards will significantly boost the system’s graphics performance.
Internal Connectors SATA1~6: SATA Connectors This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray). Video Demonstration Watch the video to learn how to Install SATA HDD. http://youtu.be/RZsMpqxythc SATA1 SATA2...
Seite 33
CPUFAN1~2,SYSFAN1~3: Fan Power Connectors The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans.
Seite 34
JFP1, JFP2: System Panel Connectors These connectors connect to the front panel switches and LEDs. The JFP1 connector is compliant with the Intel Front Panel I/O Connectivity Design Guide. When ® installing the front panel connectors, please use the optional M-Connector to simplify installation.
Seite 35
JUSB1~2: USB 2.0 Expansion Connectors This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others. Important Note that the VCC and GND pins must be connected correctly to avoid possible damage.
Seite 36
JCI1: Chassis Intrusion Connector This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will flash on screen. To clear the warning, you must enter the BIOS utility and clear the record.
Seite 37
JTPM1: TPM Module Connector This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages. JCOM1: Serial Port Connector This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs.
Seite 38
JLPT1: Parallel Port Connector This connector is used to connect an optional parallel port bracket. The parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode. En-24...
Jumpers JBAT1: Clear CMOS Jumper There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM.
Drivers and Utilities After you install the operating system you will need to install drivers to maximize the performance of the new computer you just built. MSI motherboard comes with a Driver Disc. Drivers allow the computer to utilize your motherboard more efficiently and take advantage of any special features we provide.
BIOS Setup CLICK BIOS is developed by MSI that provides a graphical user interface for setting parameters of BIOS by using the mouse and the keybord. With the CLICK BIOS, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version and the BIOS version.
Seite 42
Overview After entering BIOS, the following screen is displayed. Temperature monitor My Favorites Language System information Boot device priority bar Virtual OC Genie Button BIOS menu BIOS menu selection selection Menu display ▶ BIOS menu selection The following options are available: ■...
Seite 43
▶ Virtual OC Genie Button Enables or disables the OC Genie function by clicking on this button. When enabled, this button will be light. Enabling OC Genie function can automatically overclock with MSI optimized overclocking profile. Important We recommend that you do not to make any modification in OC menu mode and do not to load defaults after enabling the OC Genie function.
Seite 44
Operation You can control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations. Hot key Mouse Description <↑↓→← > Select Item Move the cursor <Enter> Select Icon/ Field Click/ Double-click the left button <Esc>...
Seite 45
OC Menu This menu is for advanced users who want to overclock the mainboard. Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware.
Seite 46
▶ EIST [Enabled]* Enables or disables the Enhanced Intel® SpeedStep Technology. This item will be available when "Adjust CPU Ratio" is set to [Auto]. [Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production.
Seite 47
▶ Adjust CPU Base Clock Strap [Auto]* Sets the CPU Base Clock Strap. You may overclock the CPU Base Clock by adjusting this value. Please note that overclocking behavior and stability is not guaranteed. This item appears when the installed CPU supports this setting. If set to "Auto", BIOS will configure this setting automatically.
Seite 48
▶ DRAM Timing Mode [Auto] Selects the memory timing mode. [Auto] DRAM timings will be determined based on SPD (Serial Presence Detect) of installed memory modules. [Link] Allows user to configure the DRAM timing manually for all memory channel. [UnLink] Allows user to configure the DRAM timing manually for respective memory channel.
Seite 49
< Other Setting > ▶ CPU Memory Changed Detect [Enabled]* Enables or disables the system to issue a warning message during boot when the CPU or memory has been replaced. [Enabled] The system will issue a warning message during boot and than needs to load the default settings for new devices.
Seite 50
▶ Execute Disable Bit [Enabled] Intel’s Execute Disable Bit functionality can prevent certain classes of malicious “buffer overflow” attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always. [Enabled] Enables NO-Execution protection to prevent the malicious attacks and worms.
Seite 51
▶ C1E Support [Disabled] Enables or disables the C1E function for power-saving in halt state. This item appears when "Intel C-State" is enabled. [Enabled] Enables C1E function to reduce the CPU frequency and voltage for power-saving in halt state. [Disabled] Disables this function.
Seite 52
▶ CPU Current limit (A) [Auto] Sets maximum current limit of CPU package in Turbo Boost mode. When the current is over the specified limit value, the CPU will automatically reduce the core frequency for reducing the current. ▶ 1/2/3/4-Core Ratio Limit [Auto] These items only appear when a CPU that support this function is installed.
한국어 Z97 PC Mate/ H97 PC Mate 시리즈 (MS-7850 v1.X) ATX 메인보드를 선택해 주셔서 감사합니다. Z97 PC Mate/ H97 PC Mate 시리즈 메인보드는 최적의 효 율을 위해 Intel Z97/ H97 칩셋에 기반을 둔 제품입니다. 고급 Intel LGA1150 ® ® 프로세서에 적합하게 디자인된 Z97 PC Mate/ H97 PC Mate 시리즈는 고성능...
Z97 PC Mate는 DDR3 3000(OC)/ 2800(OC)/ 2666(OC)/ 2600(OC)/ 메모리 2400(OC)/ 2200(OC)/ 2133(OC)/ 2000(OC)/ 1866(OC)/ 1600/ 1333/ 1066 MHz 지원 ■ H97 PC Mate는 DDR3 1600/ 1333/ 1066 MHz 지원 ■ 듀얼 채널 메모리 지원 ■ non-ECC, un-buffered 메모리 지원 ■...
Seite 55
모니터 ■ CPU/시스템 팬 속도 제어 BIOS 기능 ■ 64 Mb 플래시 (Z97 PC Mate용) ■ 128 Mb 플래시 (H97 PC Mate용) ■ UEFI AMI BIOS ■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0 ■ 다국어 특별 기능...
Seite 56
Norton Internet Security Solution ■ Sound Blaster Cinema (Z97 PC Mate용) ■ Network genie ■ Small Business Advantage (H97 PC Mate용) 폼 팩터 ■ ATX 폼 팩터 ■ 12 in. x 8.7 in. (30.5 cm x 22 cm) CPU에 대한 최신 정보는...
Seite 58
커넥터 참조 목록 포트 이름 포트 타입 페이지 후면 패널 Kr-7 LGA1150 CPU 소켓 Kr-9 CPUFAN1~2,SYSFAN1~3 팬 전원 커넥터 Kr-19 DIMM1~4 DDR3 메모리 슬롯 Kr-13 JAUD1 전면 패널 오디오 커넥터 Kr-22 JBAT1 CMOS 클리어 점퍼 Kr-25 JCI1 섀시 침입 커넥터 Kr-22 JCOM1 시리얼...
후면 패널 LAN포트 VGA 포트 PS/2 마우스 포트 라인 입력 USB 2.0 포트 USB 3.0 포트 라인 출력 HDMI 마이크 DVI-D 포트 PS/2 키보드 포트 ▶ PS/2 키보드/마우스 포트 PS/2 마우스/키보드 DIN 커넥터는 PS/2 마우스/키보드용입니다. ® ® ▶ USB 2.0 포트 USB 2.0 포트는...
Seite 60
중요사항 이 플랫폼은 듀얼 디스플레이와 트리플 디스플레이 기능을 지원합니다. HDMI+VGA HDMI+DVI VGA+DVI HDMI+VGA+DVI 확장 모드 ◯ ◯ ◯ ◯ (두번째, 세번째 모니터에 바탕 화 면을 확장) 클론 모드 ◯ ◯ ◯ ◯ (모니터에 같은 화면이 나타남) ▶ LAN 포트 표준 RJ-45 LAN 잭은 LAN(Local Area Network) 연결용입니다. LED 상태...
CPU (중앙 처리 장치) LGA 1150 CPU 소개 메인보드에 CPU를 정확하게 배치하기 위하여 LGA 1150 CPU 표면에 2개의 요철 과 하나의 노란색 삼각형이 있습니다. 노란색 삼각형은 1번 핀을 나타냅니다. 요철 요철 노란색 삼각형은 1번 핀을 나타냅니다. 중요사항 과열 과열은 CPU와 시스템을 심각하게 손상시킬수 있으니 CPU가 과열되지 않도록 쿨러팬 이...
CPU 및 히트싱크 설치 CPU 설치 시, CPU 히트싱크를 반드시 설치하세요. CPU 히트싱크는 과열을 방지하고 시스템 성능을 유지하는데 꼭 필요합니다.아래의 순서에 따라 CPU 및 히트싱크를 정확 하게 설치하세요. 잘못 설치할 경우 CPU와 메인보드가 손상될수 있습니다. 데모 동영상 CPU 및 히트싱크 설치에 대한 동영상을 참조하려면 아래의 웹사이트 를...
Seite 63
3. 요철을 올바른 방향으로 소켓 정렬 키에 맞춘 후 CPU를 소켓에 내려놓습니다. CPU가 소켓에 제대로 장착되었는지 확인하세요. 4. 로드 플레이트를 닫고 노브에 고정한 후 로드 레버를 아래로 눌러 고정탭에 고정합 니다. CPU 요철 정렬 키 노브 5. 로드 레버를 아래로 누르면 PnP 캡이 CPU 소켓에서 자동으로 분리됩니다. PnP 캡 을...
Seite 64
7. 메인보드에 CPU 팬 커넥터를 장착합니다. 8. 팬의 선이 팬 커넥터 쪽을 향하고 고정핀이 메인보드의 홀에 꼭 맞게 히트싱크를 메 인보드에 장착합니다. CPU 팬 커넥터 9. 4개의 고정핀이 메인보드의 홀에 완전히 박힐 때까지 히트싱크를 누릅니다. 4개의 고정핀을 눌러 히트싱크를 고정합니다. 고정핀이 올바른 위치에 고정되었다면 닫히 는...
메모리 DIMM 슬롯은 메모리 모듈을 설치하는데 사용됩니다. 호환 가능한 부품에 대한 자세한 내용은 http://www.msi.com/service/test-report/를 참조하세요. DIMM1 DIMM2 DIMM3 DIMM4 데모 동영상 메모리 설치에 대한 동영상을 참조하려면 아래의 웹사이트를 방문하세요. http://youtu.be/76yLtJaKlCQ 듀얼 채널 모드 배포 규칙 듀얼 채널 모드에서는 메모리 모듈이 2개의 데이터 버스 채널을 통해 데이터를 동시에 전송...
장착 스크류 홀 메인보드를 설치할 때, 먼저 컴퓨터 케이스의 베이스 플레이트에 메인보드 설치를 위한 지지대를 장착합니다. 컴퓨터 케이스와 함께 제공되는 I/O 쉴드(백 플레이트)가 있을 경 우 메인보드 패키지와 함께 제공되는 I/O 쉴드(백 플레이트)로 교체하세요. I/O 쉴드(백 플레이트)는 스크류가 필요없이 컴퓨터 케이스에 쉽게 들어가야 합니다. 장착 플레이트 의...
전원 공급 장치 데모 동영상 전원 공급 장치 커넥터 설치에 대한 동영상을 참조하려면 아래의 웹사이트를 방문하세요. http://youtu.be/gkDYyR_83I4 JPWR1~2: ATX 전원 커넥터 이 커넥터를 사용하여 ATX 전원 공급 장치를 연결할수 있습니다. ATX 24핀 전원 공급 장치를 연결하려면 커넥터에 전원 공급 케이블을 정렬하고 케이블을 커넥터 안쪽으로 꼭...
확장 슬롯 이 메인보드에는 별도의 그래픽, 오디오 카드등과 같은 확장 카드 사용을 위한 포트들 이 다수 포함되어 있습니다. PCI_E1~4: PCIe 확장 슬롯 PCIe 슬롯은 PCIe 인터페이스 확장 카드를 지원합니다. PCIe 3.0 x16 슬롯 PCIe 2.0 x16 슬롯 PCIe 2.0 x1 슬롯 PCI1~2: PCI 확장...
비디오/ 그래픽 카드 가능한 경우, 메인보드는 CPU의 통합 그래픽 프로세서를 활용하지만 별도의 그래픽 카 드도 메인보드의 확장 슬롯에 설치할수 있습니다. 별도의 비디오 카드를 하나 또는 하 나 이상 추가하면 시스템의 그래픽 성능을 크게 높일수 있습니다. 최적의 호환성을 위 해 MSI 그래픽 카드를 사용할 것을 권장합니다. 데모...
내장 커넥터 SATA1~6: SATA 커넥터 이 커넥터는 고속 SATA 인터페이스 포트에 사용됩니다.각 커넥터는 하나의 SATA 장 치에 연결할수 있습니다. SATA 장치는 디스크 드라이브(HDD), 솔리드 스테이트 드라 이브(SSD)및 옵티컬 드라이브 (CD/ DVD/ 블루 레이)를 포함합니다. 데모 동영상 SATA HDD 설치에 대한 동영상을 참조하려면 아래의 웹사이트를...
Seite 71
CPUFAN1~2,SYSFAN1~3: 팬 전원 커넥터 팬 전원 커넥터는 +12V의 시스템 쿨링 팬을 지원합니다. 메인보드에 시스템 하드웨어 모니터 칩셋이 온보드 되어 있는 경우 CPU 팬 제어를 활용하기 위하여 속도 센서가 있 는 특별히 디자인된 팬을 사용해야 합니다. 시스템 팬은 전부 연결하세요. 만일 시스템 팬을...
Seite 72
JFP1, JFP2: 시스템 패널 커넥터 이 커넥터는 전면 패널 스위치 및 LED에 연결됩니다. JFP1커넥터는 Intel Front Panel ® I/O Connectivity Design Guide를 준수합니다. 전면 패널 커넥터 설치를 간편히 하기 위 하여 옵션인 M-커넥터를 사용하세요. 컴퓨터 케이스로 부터 모든 선을 M-커넥터에 연 결한...
Seite 73
JUSB1~2: USB 2.0 확장 커넥터 이 커넥터는 USB HDD,디지컬 카메라, MP3 플레이어,프린터, 모뎀 등과 같은 고속 USB 주변 장치를 연결하도록 디자인 되었습니다. 중요사항 VCC 및 GND의 핀을 정확히 연결하여야 손상을 방지할수 있습니다. JUSB3: USB 3.0 확장 커넥터 USB 3.0 포트는 USB 2.0 장치와 호환할수 있습니다.데이터 전송속도 최대 5Gbits/s (SuperSpeed)를...
JCI1: 섀시 침입 커넥터 이 커넥터는 섀시 침입 스위치 케이블에 연결됩니다. 컴퓨터 케이스가 열리는 경우, 섀 시 침입 메커니즘이 활성화됩니다. 시스템이 이 상태를 기록하고 화면에 경고 메시지가 나타납니다. 경고를 지우려면, BIOS 유틸리티에서 레코드를 지워야 합니다. JAUD1: 전면 패널 오디오 커넥터 이...
JTPM1: TPM 모듈 커넥터 이 커넥터는 TPM (Trusted Platform Module) 모듈에 연결됩니다. 자세한 내용과 사용법 은 TPM 보안 플랫폼 설명서를 참조하세요. JCOM1: 시리얼 포트 커넥터 이 커넥터는 16550A 고속 통신 포트로서 16바이트의 FIFO를 송수신합니다. 시리얼 장 치를 연결할 수 있습니다. Kr-23...
Seite 76
JLPT1: 페러렐 포트 커넥터 이 커넥터는 옵션인 페러렐 포트 브래킷을 연결하는데 사용됩니다. 이 페러렐 포트는 표준 프린터 포트로서, 확장 페러렐 포트(EPP) 및 확장 성능 페러렐 포트(ECP) 모드를 지원합니다 Kr-24...
Seite 77
점퍼 JBAT1: CMOS 클리어 점퍼 보드에 시스템 구성 데이터를 유지하기 위해 외부 배터리로부터 전원을 공급 받는 CMOS RAM이 있습니다. CMOS RAM의 경우, 시스템을 켤 때마다 시스템이 OS를 자 동으로 부팅할수 있도록 합니다. 시스템 구성을 지우려면 점퍼를 아래와 같이 설정하여 CMOS RAM을 지우세요. 데이터...
드라이버 및 유틸리티 구입한 컴퓨터의 성능을 최대화하려면 운영 체제를 설치한 다음 드라이버도 설치해야 합니다. 드라이버 디스크는 MSI 메인보드와 함께 제공됩니다. 드라이버를 설치하여 메 인보드를 보다 효율적으로 활용하고 모든 특별 기능을 사용할 수 있습니다. 번들 보안 프로그램을 설치하여 바이러스로부터 컴퓨터를 보호할 수 있습니다. 그 외에 도...
BIOS 설정 CLICK BIOS는 MSI에서 개발한 그래픽 사용자 인터페이스로서 마우스와 키보드를 사 용하여 BIOS를 설정할수 있습니다. CLICK BIOS를 사용하여 BIOS 설정을 변경하고 CPU 온도를 감시할수 있으며 부팅 장 치의 우선순위를 선택하고 CPU 이름, DRAM 용량, OS버전 및 BIOS 버전 등과 같은 시 스템...
Seite 80
개요 BIOS를 시작하면 아래의 화면이 표시됩니다. 온도 모니터 언어 시스템 정보 모델 명 Virtual OC Genie 버튼 부팅 장치 우 선순위 바 BIOS 선택 메뉴 BIOS 선택 메뉴 메뉴 디스플레이 ▶ BIOS 선택 메뉴 다음과 같은 옵션이 제공됩니다. ■ SETTINGS - 이 메뉴를 사용하여 칩셋 및 부팅장치에 대한 설정을 지정할수 있 습니다.
Seite 81
▶ Virtual OC Genie 버튼 이 버튼을 클릭하여 OC Genie 기능을 활성화 또는 비활성화합니다. 기능이 활성화 되 면 이 버튼이 밝아지며 자동으로 MSI 최적의 오버클로킹 프로파일로 오버클럭할 수 있 습니다. 중요사항 OC Genie 기능을 활성화한 후 OC 메뉴에서 값을 수정하거나 기본 값을 로드하지 말것 을...
Seite 82
컨트롤 마우스 또는 키보드를 사용하여 BIOS 설정을 제어할수 있습니다.아래 그림은 핫 키와 마우스 사용에 대한 설명입니다. 핫 키 마우스 설명 <↑↓→← > 항목 선택 커서 이동 <Enter> 아이콘/ 필드 선택 클릭/ 왼쪽 버튼 더 블 클릭 <Esc> 종료 메뉴로 가거나 이전 메뉴로 이동 오른쪽...
Seite 83
OC 메뉴 이 메뉴는 메인보드를 오버클럭하려는 고급 사용자를 위한 메뉴입니다. 중요사항 • 이 항목은 고급 사용자만을 위한 항목입니다. • 오버클로킹은 보증하지 않습니다. 부적절하게 작동하였을 경우 보증이 무효화 되며 컴퓨터 하드웨어가 심각하게 손상될수 있습니다. 오버클로킹에 익숙하지 않은 경우, OC Genie를 사용하여 보다 쉽게 오버클로킹 할 •...
Seite 84
▶ EIST [Enabled]* 이 항목을 사용하여 Enhanced Intel SpeedStep Technology를 활성화 또는 비활성화 ® 합니다. 이 항목은 "Adjust CPU Ratio"가 [Auto]로 설정된 경우, 사용할 수 있습니다. [Enabled] 이 기능을 활성화 하여 CPU 전압 및 코어 주파수를 동적으로 조정하여 평균 전원 소비와 평균 열량을 줄일 수 있습니다. [Disabled] 이...
Seite 85
▶ Adjust CPU Base Clock Strap [Auto]* 이 항목을 사용하여 CPU Base Clock Strap을 설정할수 있습니다. 값을 조정하여 CPU 베이스 클럭을 오버클럭할 수 있지만 오버클로킹의 작동이나 안정성은 보증하지 않습 니다. 이 항목은 설치된 CPU가 이 설정을 지원하는 경우 나타납니다. "Auto"로 설정하 면...
Seite 86
▶ DRAM Timing Mode [Auto] 이 항목을 사용하여 메모리 타이밍 모드를 선택합니다. [Auto] DRAM 타이밍은 설치된 메모리 모듈의 SPD (Serial Presence Detect)에 의해 결정됩니다. [Link] 모든 메모리 채널의 DRAM 타이밍을 수동으로 설정할 수 있습니다. [UnLink] 각 메모리 채널의 DRAM 타이밍을 수동으로 설정할 수 있습니다. ▶...
Seite 87
< 기타 설정 사항 > ▶ CPU Memory Changed Detect [Enabled]* 이 기능을 활성화 또는 비활성화하여 CPU 또는 메모리가 교체되었을 경우, 시스템 부 팅시 경고 메시지가 나타날지를 결정합니다. [Enabled] 부팅시 경고 메시지가 나타나며 새 장치에 필요한 기본 값을 로드해야 합 니다.
Seite 88
▶ Execute Disable Bit [Enabled] 운영 체제에 대한 ‘버퍼 오버플로우’ 공격 등 바이러스와 악성 코드에 대해 시스템을 보안하고 악의적인 웜(혹은 바이러스)이 버퍼영역에 코드화되어 침입할 경우, 프로 세서는 연산을 차단해, 시스템의 손상이나 웜의 확산을 방지합니다. 이 기능을 항상 활성화할것을 권장합니다. [Enabled] NO-Execution 보호...
Seite 89
▶ C1E Support [Disabled] C1E 기능을 활성화 또는 비활성화하여 시스템 유휴 상태에서 전력을 절약할 수 있 습니다. 이 항목은 "Intel C-State" 기능이 활성화된 경우 나타납니다. [Enabled] 이 기능을 활성화하여 CPU 주파수 및 전압을 줄이고 시스템 유휴 상 태에서 전력을 절약할 수 있습니다. [Disabled] 이...
Seite 90
▶ CPU Current limit (A) [Auto] 터보 부스트 모드에서 CPU 패키지의 최대 전류 제한 값을 설정합니다. 전류가 지정 된 제한 값을 초과할 경우, CPU는 자동으로 코어 주파수를 낮춰 전류를 줄여줍니다. ▶ 1/2/3/4-Core Ratio Limit [Auto] 이 항목은 설치된 프로세서가 이 기능을 지원하는 경우 나타납니다. 이 항목은 터보 부스트...
Seite 93
CPU/システム温度の検知 ■ CPU/システム回転速度の検知 ェアモニ ■ CPU/システム回転速度のコントロール ター BIOS機能 ■ 64 Mbフラッシュ (Z97 PC Mate) ■ 128 Mbフラッシュ (H97 PC Mate) ■ UEFI AMI BIOS ■ ACPI 5.0、PnP 1.0a、SM BIOS 2.7、DMI 2.0 ■ 多言語 特徴機能 ■ Military Class 4 ■ OC Genie 4 ■...
Seite 94
Intel Extreme Tuningユーティリティ ■ Norton Internet Security Solution ■ Sound Blaster Cinema (Z97 PC Mate) ■ Network genie ■ Small Business Advantage (H97 PC Mate) 寸法 ■ ATX寸法 ■ 12 in. x 8.7 in. (30.5 cm x 22 cm) 最新のCPU対応表は下記Webサイトをご参照ください。 http://www.msi.com/cpu-support/ 最新のメモリモジュール対応状況については...
BIOSの設定 CLICK BIOSはMSIにより開発し、マウスとキーボードでBIOSのパラメーターを設定 するために、パラメーターグラフィカルユーザーインターフェースを提供します。 CLICK BIOSで、ユーザーがBIOSの設定を変更し、CPUの温度を監視し、ブートデバ イス優先順序を選択し、およびCPUの名前、DRAM容量、OSバージョンとBIOSバー ジョンなどのシステムの情報を見ることができます。バックアップ、または他人と共 有するために、パラメーターデータをインポート/エクスポートすることもできます。 BIOSセットアップ画面の起動 電源を投入するとハードウェアの初期化が始まり、POST(Power On Self Test)画面が 現れます。以下のメッセージが表示されている間に、<DEL>キーを押してBIOSセッ トアップ画面を呼び出します。 Press <Del> to run BIOS setup, or <F11> to run boot menu (<DEL>キーを押してセットアップ画面を呼び出して、またはF11キ ーを押してブート画面を呼び出す。) <DEL>を押す前にこのメッセジーが消えてしまった場合、電源をいったん切ってから 再び投入するか、<RESET>を押すかして、システムを再起動してください。<Ctrl>、 <Alt>と<Delete>を同時に押しても再起動できます。 MSIはさらにBIOSセットアップ画面を表示するための2つの方法を提供します。“MSI Fast Boot”ユーティリティ画面で “GO2BIOS”タブをクリックするか、マザーボード基 板上の”GO2BIOS”ボタン(オプション)を押すことで、再起動後のPC起動時にBIOSセ ットアップ画面が表示されます。 “MSI Fast Boot”ユーティ リティの”GO2BIOS”ボタ...
Seite 131
■ CPU/ 系統風扇速度偵測 ■ CPU/ 系統風扇速度控制 BIOS 功能 ■ 64 Mb flash (Z97 PC Mate) ■ 128 Mb flash (H97 PC Mate) ■ UEFI AMI BIOS ■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0 ■ 支援多國語 特色 ■...
Seite 132
Intel Extreme Tuning Utility ■ Norton Internet Security Solution ■ 環繞音場優化技術 (Z97 PC Mate) ■ Network genie ■ Small Business Advantage (H97 PC Mate) 尺寸 ■ ■ 12 x 8.7 英吋 (30.5 x 22 公分) 欲知更多 CPU 相關訊息,請造訪微星科技網站 http://www.msi.com/cpu-support/ 欲知更多相容元件的相關訊息,請造訪微星科技網站...
CPU (中央處理器) LGA 1150 插座 CPU 簡介 LGA 1150 CPU 表面有 2 處凹槽及 1 處黃色三角標記,協助您在整個主機板配置 中能正確擺放 CPU。黃色三角標記為腳位 1 位置。 凹槽 凹槽 黃色三角標記為腳位 1 位置 注意事項 溫度過高 溫度過高會嚴重損壞 CPU 以及主機板。務必確認散熱風扇正常運作,以免 CPU 過 熱。並於 CPU 與散熱器間均勻塗抹散熱膏 (或貼上散熱膠帶) 加強散熱。 更換 CPU 更換 CPU 時,為保險起見,應先關機後再拔掉電源線,以免損壞 CPU。 超頻...
Seite 138
安裝中央處理器與散熱風扇 在安裝 CPU 時,記得要裝上 CPU 散熱風扇,避免過熱以維持系統穩定。請依下列步 驟,正確安裝 CPU 與 CPU 散熱風扇。不當的安裝可能會使 CPU 與主機板受損。 示範影片 觀看正確安裝 CPU & 風扇的方法。 http://youtu.be/bf5La099urI 1. 鬆開拉桿到全開的位置。 2. 鬆開拉桿的同時,上蓋會順勢往上全開。 拉桿 上蓋 固定片 注意事項 請勿觸摸 CPU 插座針腳或 CPU 底部。 Tc-10...
Seite 139
3. 將凹槽對準插座對齊點,將 CPU 往下平放,檢查 CPU 是否已安裝好在插座上。 4. 將拉桿下壓扣住。 CPU 凹槽 對齊點 固定旋鈕 5. 壓下拉桿,PnP 上蓋會自動從 CPU 插座鬆開,請勿丟棄 PnP 上蓋,若插座未放置 CPU,請務必用 PnP 上蓋保護插座針腳。 6. 在 CPU 上方均勻塗抹一層厚的散熱膏 (或貼上散熱膠帶) 有助 CPU 散熱。 PnP 上蓋 散熱膏 Tc-11...
Seite 140
7. 找到主機板上的 CPU 風扇接頭。 8. 將散熱風扇放上主機板,將風扇排線往風扇接頭方向放,扣件對準主機板上的孔 位。 CPU 風扇接頭 9. 將散熱風扇向下壓穩,再將 4 個扣件往下壓固定散熱風扇。固定好會聽到喀嚓聲。 10. 檢查主機板確認扣件均已固定好。 11. 最後將 CPU 風扇排線接到主機板上的 CPU 風扇接頭後即告完成。 主機板 扣件底端 注意事項 確認 CPU 散熱風扇已與 CPU 黏緊後再開機。 • 未安裝 CPU 時,請用塑膠蓋保護 CPU 插座以免受損。 • • 若另行購買 CPU 散熱風扇,請參閱該包裝內安裝細節。 Tc-12...
BIOS 設定 CLICK BIOS 是由 MSI 團隊所研發的圖形使用者介面,支援以滑鼠及鍵盤來設定 BIOS 參數。 透過功能強大的 CLICK BIOS,可調整 BIOS 設定、檢視 CPU 名稱、記憶體容量及 BIOS 版本等系統訊息,或是監控 CPU 溫度、選取開機裝置順序等。您還可將參數輸 入及輸出、製作備份或與友人分享設定數值。且在連上網路後,就能瀏覽網頁、收發信 並即時更新系統。 進入 BIOS 設定 開機後,系統就會開始 POST (開機自我測試) 程序。當下列訊息出現在螢幕上時,請按 <DEL> 鍵,進入設定程式。 Press <Del> to run BIOS setup, or <F11> to run boot menu (按...
Seite 159
超頻選單 本選單提供給想超頻主機板的進階使用者。 注意事項 • 手動超頻功能僅建議由進階使用者進行操作。 • 恕無法保證超頻動作的成功與否,且如超頻失敗可能會使保固失效或嚴重損壞硬體 。 • 若您不熟悉超頻,建議使用 OC Genie 功能來輕鬆超頻。 ▶ Simple/Advanced Mode [Simple] 啟用或關閉 BIOS 進階超頻設定。 [Simple] 在 BIOS 設定提供一般超頻設定 [Advanced] 在 BIOS 設定,為豐富經驗的玩家提供進階超頻設定 註:* 表進階模式的超頻設定。 < CPU 設定 > ▶ Adjust CPU Ratio [Auto] 本項調整控制 CPU 時脈速度的 CPU 倍頻。本項需 CPU 支援本功能才能變更。 ▶...
Seite 160
▶ Intel Turbo Boost [Enabled]* E本項開啟或關閉 Intel Turbo Boost 功能。本項需 CPU 支援本功能才會顯示。 ® [Enabled] 開啟本功能,系統自動將 CPU 效能發揮到極致 [Disabled] 關閉本功能 ▶ Enhanced Turbo [Auto] (Z97) 本項開啟或關閉所有 CPU 核心的進階 Turbo 功能,推升 CPU 效能。 [Auto] 本項由 BIOS 自動設定 [Enabled] 所有 CPU 核心倍頻都推升到最大值 [Disabled] 關閉本功能...
Seite 161
▶ Filter PLL [Auto]* 本項開啟或關閉 CPU PLL 濾波器功能。本項需 CPU 支援本功能才會顯示。 [Auto] 本項由 BIOS 自動設定 [Enabled] 當基頻 strap 設為高數值時,可提供基頻多種超頻範圍 [Disabled] 提供一般常用基頻範圍 < DRAM 設定> ▶ DRAM Reference Clock [Auto]* 本項設定記憶體的參考時脈。有效範圍依 CPU 效能而定。本項需 CPU 支援本功能才 會顯示。 ▶ DRAM Frequency [Auto] 本項調整 DRAM 頻率。請注意我們無法保證超頻動作。 ▶...
Seite 162
▶ SVID Communication [Auto]* (Z97) 本項開啟或關閉 SVID (Serial Voltage Identification) 功能。 [Auto] 本項由 BIOS 自動設定 [Enabled] PWM 相位會依 CPU SVID 動態調整 [Disabled] 關閉本功能 ▶ VCCIN Voltage [Auto] 本項設定 CPU 輸入電壓,主要供電給 CPU 並與 CPU 元件共用電源。 ▶ DRAM/ DDR XXX/ PCH XXX/ XXX Voltage [Auto] 這些選項用來調整記憶體或...
Seite 167
■ CPU/系统风扇速率检测 ■ CPU/系统风扇速率控制 BIOS 功能 ■ 64 Mb flash (针对 Z97 PC Mate) ■ 128 Mb flash (针对 H97 PC Mate) ■ UEFI AMI BIOS ■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0 ■ 多国语言 特殊功能 ■...
Seite 168
Norton Internet Security Solution ■ Sound Blaster Cinema (针对 Z97 PC Mate) ■ Network genie ■ Small Business Advantage (针对 H97 PC Mate) 规格 ■ ATX 规格 ■ 12 in. x 8.7 in. (30.5 cm x 22 cm) 要了解 CPU 的最新信息,请登录...
Seite 201
Installation/ 설치하기/ インストール/ 安裝/ 安装 This chapter provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet.